Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC August 11, 2005	Ritchey Design Inc. Recall of Bicycle Wheels The hub in the bicycle's rear wheel can fail to engage properly, causing no resistance when pedaling. The bicycle rider can lose balance, fall and suffer injuries.
U.S. CPSC August 8, 2005	American Classic Recall of Bicycle Wheels The hub in the bicycle's rear wheel can fail to engage properly, causing no resistance when pedaling. The bicycle rider could lose balance, fall and suffer injuries.
U.S. CPSC August 19, 2009	Burley Design Recalls Child Trailers Due to Risk of Injury The axle assembly's internal sleeve can loosen, causing one wheel to separate from the trailer. This poses a risk of injury to the child occupant or bike rider.
U.S. CPSC February 4, 2009	Bicycles with R-SYS Wheel Rims Recalled by Mavic USA Due to Crash Hazard The spokes on the bicycle's front wheel rim can break during use, posing a fall and crash hazard to riders.
U.S. CPSC October 23, 2008	Shimano American Corp. Recalls Wheels for Bicycles; Flat Tire Can Pose Injury Risk to Riders Rim surface and spoke hole plugs on the wheel can cause a puncture to the inner tube, resulting in a flat tire. This can cause the rider to lose control and fall.
U.S. CPSC August 2, 2005	WaveCrest Laboratories LLC Recall of Electric Bicycles The front and/or rear wheel can collapse, causing the rider to fall and suffer injuries.
U.S. CPSC July 1, 2005	HiPer Technology Inc. Recall of ATV Wheels The aluminum center section of the 9-inch wheel can come apart causing the tire and rim to unexpectedly separate from the ATV, posing a risk of serious injury if the rider loses control of the vehicle.
U.S. CPSC August 2, 2005	Giant Bicycle, Inc. Recall of Bicycles The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack.
U.S. CPSC July 2, 2008	Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard.
U.S. CPSC July 12, 2006	Shimano American Corp. Recalls Quick-Release Device for Bicycles Posing Fall Hazard The quick release skewers can unexpectedly fail or break when locked in position. When this happens the rider could lose control and fall.
U.S. CPSC May 19, 2009	Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash.
U.S. CPSC August 17, 2005	Torelli Imports Recall of Bicycle Tires The tire can separate from the wheel, resulting in a flat tire. This can cause the rider to lose control and fall.
U.S. CPSC September 2, 2004	World Wide Cycle Supply Inc. Recall of Bicycles Sold at Toys "R" Us The fork that holds the front wheel can separate at the weld, causing the rider to fall and suffer injuries.
U.S. CPSC July 7, 2006	Felt Bicycles Announce Recall to Repair Mountain Bicycles for Brake Failure The steel brake boss can detach from the frame, causing the rider to lose control and fall.
U.S. CPSC February 27, 2007	Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall.
U.S. CPSC March 7, 2006	Fall Hazard Prompts Performance Inc. to Recall Bicycle Resistance Trainers for Repair The base of the 2006 Performance Travel Trac Trainers has a blocking mechanism that can break, causing the bicycle to disengage from the stand and posing a fall hazard.
U.S. CPSC August 17, 2006	Target Recalls Scooters -- Various Breaking Parts Present Fall Hazard The handlebars, wheels and wheel brakes can break and detach, causing the rider to lose control, fall and possibly suffer injuries.
U.S. CPSC May 19, 2009	Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries.
U.S. CPSC June 16, 2004	Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle.
U.S. CPSC August 3, 2007	Raleigh America Recalls Bicycles; Forks Can Break Causing Loss of Control The forks can break during normal use, causing the rider to lose control, fall and suffer serious injuries.
U.S. CPSC October 16, 2007	Formula Brake USA Recalls Disc Brakes for Bicycles Due to Risk of Failure The brake's hand lever can separate, resulting in loss of braking. This can cause the rider to lose control of the bicycle, posing a risk of injury to riders.
U.S. CPSC August 19, 2009	Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury.
U.S. CPSC February 18, 2009	True Value Recalls Wheelbarrows; Over-Inflated Tire Can Cause Wheel to Break and Pose Injury Hazard Over-inflating the tire could cause the wheel's plastic rim to break, posing an injury to the user.
U.S. CPSC March 28, 2007	Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision.
U.S. CPSC August 19, 2009	Bicycles Recalled by Nirve Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls.
U.S. CPSC May 5, 2005	Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries.
U.S. CPSC May 19, 2009	Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash.
U.S. CPSC March 17, 2009	Cannondale Recalls Road Bicycles Due to Fall Hazard The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider.
U.S. CPSC November 2, 2004	Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists.
U.S. CPSC January 13, 2005	Flow International Recall of Snowboard Bindings The pin used to secure the rear snaplock lever to the bindings can bend or break.
U.S. CPSC October 16, 2007	Huffy Recalls Bicycles Due To Cranks Falling Off; Riders Can Lose Control of Bike The bicycle crank can unexpectedly come off, causing the rider to lose control, fall and suffer serious injuries.
U.S. CPSC September 29, 2004	Full Speed Ahead Recall of Scatto Bicycle Wheel Quick Releases An internal part in the lever mechanism can break, reducing clamping effectiveness and rendering the unit inoperable, potentially causing a bicyclist to fall.
U.S. CPSC January 7, 2005	Norco Products Ltd. Recall of Bicycle Attachment The hardware used in the assembly of the universal hitch may come loose causing the unit to separate from the lead bicycle, which could lead to a serious injury or death to the rider of the bicycle attachment.
U.S. CPSC December 23, 2008	Magura USA Recalls Bicycle Suspension Forks Due to Crash Hazard The front bicycle suspension fork can break, causing the rider to crash.
U.S. CPSC October 13, 2004	Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle.
U.S. CPSC May 20, 2005	Carter Brothers Manufacturing Co. Inc. Recall of Fun-Kart Go-Karts The wheel could separate from the go-kart, posing a roll-over hazard.
U.S. CPSC June 23, 2009	Loaded Boards Recalls Orangatang Skateboard Wheels; Blow-outs Pose Risk of Injury to Riders The recalled skateboard wheel's core can shear and blow-out causing the wheel to separate from the skateboard truck's axle and bearings. This poses a risk of serious injury to riders.
U.S. CPSC May 9, 2002	Rocky Mountain Bicycles Recalls Mountain Bicycles The chainstay that holds the rear wheel in place can fail, causing the rear wheel to separate from the bicycle. This can cause the rider to lose control and crash...
U.S. CPSC October 14, 2009	Moser Enterprises Recalls Schwalbe Brand Bicycle Tires Due to Fall Hazard The tire layers could separate causing the inner tube to rupture, posing a fall hazard to consumers.
U.S. CPSC November 12, 2010	Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders.
U.S. CPSC February 7, 2008	Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries.
U.S. CPSC November 14, 2001	Performance Inc. Recall Bicycle Rims The rims can crack causing the rider to lose control of the bicycle, fall, and suffer injuries.
U.S. CPSC January 8, 2008	Cannondale Recalls Scalpel Mountain Bikes; Frame Failure Poses Crash Hazard The frame can break while in use, causing the rider to lose control and suffer injuries from a fall or collision.
U.S. CPSC September 28, 2006	Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured.
U.S. CPSC May 13, 2010	Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash.
U.S. CPSC October 23, 2007	Reynolds Recalls Bicycle Forks Due to Fall Hazard The fork tips could separate from the fork legs, causing the wheel to come loose from the fork while riding. This could pose a serious fall hazard to riders.
U.S. CPSC February 10, 2009	Marzocchi Recalls Bicycle Forks Due to Crash Hazard and Risk of Injury during Repair The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash.
U.S. CPSC January 9, 2007	Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall.
U.S. CPSC June 8, 2011	Quality Bicycle Products Recalls Civia Bicycle Racks Due to Fall Hazard The bicycle rack's mounting bracket can crack or break. When this happens, the rack can fall onto the bicycle's front wheel, posing a fall hazard to the rider.
U.S. CPSC January 19, 2006	Syntace USA Recall of Bicycle Handlebar Stems The recalled bicycle stems can crack or break under normal conditions, causing the rider to fall and suffer serious injury.