Similar Articles |
|
U.S. CPSC August 11, 2005 |
Ritchey Design Inc. Recall of Bicycle Wheels The hub in the bicycle's rear wheel can fail to engage properly, causing no resistance when pedaling. The bicycle rider can lose balance, fall and suffer injuries. |
U.S. CPSC July 6, 2005 |
Rolf Prima Inc. Recall of Bicycle Wheels The rear wheel freehub mechanism can malfunction causing no resistance when pedaling. The bicycle rider could lose balance, fall and suffer injuries. |
U.S. CPSC July 2, 2008 |
Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard. |
U.S. CPSC July 12, 2006 |
Shimano American Corp. Recalls Quick-Release Device for Bicycles Posing Fall Hazard The quick release skewers can unexpectedly fail or break when locked in position. When this happens the rider could lose control and fall. |
U.S. CPSC August 19, 2009 |
Burley Design Recalls Child Trailers Due to Risk of Injury The axle assembly's internal sleeve can loosen, causing one wheel to separate from the trailer. This poses a risk of injury to the child occupant or bike rider. |
U.S. CPSC October 13, 2004 |
Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle. |
U.S. CPSC May 19, 2009 |
Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC May 19, 2009 |
Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries. |
U.S. CPSC May 5, 2005 |
Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries. |
U.S. CPSC August 2, 2005 |
WaveCrest Laboratories LLC Recall of Electric Bicycles The front and/or rear wheel can collapse, causing the rider to fall and suffer injuries. |
U.S. CPSC August 2, 2005 |
Giant Bicycle, Inc. Recall of Bicycles The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack. |
U.S. CPSC February 10, 2009 |
Marzocchi Recalls Bicycle Forks Due to Crash Hazard and Risk of Injury during Repair The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash. |
U.S. CPSC March 17, 2009 |
Cannondale Recalls Road Bicycles Due to Fall Hazard The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider. |
U.S. CPSC October 23, 2008 |
Shimano American Corp. Recalls Wheels for Bicycles; Flat Tire Can Pose Injury Risk to Riders Rim surface and spoke hole plugs on the wheel can cause a puncture to the inner tube, resulting in a flat tire. This can cause the rider to lose control and fall. |
U.S. CPSC June 16, 2004 |
Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle. |
U.S. CPSC July 1, 2005 |
HiPer Technology Inc. Recall of ATV Wheels The aluminum center section of the 9-inch wheel can come apart causing the tire and rim to unexpectedly separate from the ATV, posing a risk of serious injury if the rider loses control of the vehicle. |
U.S. CPSC March 7, 2006 |
Fall Hazard Prompts Performance Inc. to Recall Bicycle Resistance Trainers for Repair The base of the 2006 Performance Travel Trac Trainers has a blocking mechanism that can break, causing the bicycle to disengage from the stand and posing a fall hazard. |
U.S. CPSC July 7, 2006 |
Felt Bicycles Announce Recall to Repair Mountain Bicycles for Brake Failure The steel brake boss can detach from the frame, causing the rider to lose control and fall. |
U.S. CPSC May 19, 2009 |
Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC July 31, 2003 |
Cervelo Cycles Inc. Bicycle Fork Recall The forks on the bicycles can develop cracks near the crown area resulting in failure of the fork and posing a risk of injury to the rider. |
U.S. CPSC February 4, 2009 |
Bicycles with R-SYS Wheel Rims Recalled by Mavic USA Due to Crash Hazard The spokes on the bicycle's front wheel rim can break during use, posing a fall and crash hazard to riders. |
U.S. CPSC February 27, 2007 |
Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall. |
U.S. CPSC January 14, 2009 |
Giant Bicycle, Inc. Recalls Bicycles; Fork Can Break Causing Rider To Fall The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer. |
U.S. CPSC October 16, 2007 |
Huffy Recalls Bicycles Due To Cranks Falling Off; Riders Can Lose Control of Bike The bicycle crank can unexpectedly come off, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC January 12, 2010 |
Bicycles and Framesets Recalled By Seattle Bike Supply Due to Fall Hazard The bicycle's fork legs can separate from the fork crown and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC August 17, 2006 |
Target Recalls Scooters -- Various Breaking Parts Present Fall Hazard The handlebars, wheels and wheel brakes can break and detach, causing the rider to lose control, fall and possibly suffer injuries. |
U.S. CPSC February 7, 2008 |
Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries. |
U.S. CPSC September 22, 2011 |
Bridgeway Recalls Bicycles Due to Fall Hazard The bicycle chain can break, causing a rider to lose control and fall. |
U.S. CPSC September 2, 2004 |
World Wide Cycle Supply Inc. Recall of Bicycles Sold at Toys "R" Us The fork that holds the front wheel can separate at the weld, causing the rider to fall and suffer injuries. |
U.S. CPSC October 14, 2010 |
The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist. |
U.S. CPSC August 19, 2009 |
Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury. |
U.S. CPSC May 9, 2002 |
Rocky Mountain Bicycles Recalls Mountain Bicycles The chainstay that holds the rear wheel in place can fail, causing the rear wheel to separate from the bicycle. This can cause the rider to lose control and crash... |
U.S. CPSC March 24, 2005 |
MGA Entertainment Recall of Bratz Stylin' Scooters The wheels of the scooter can break or become damaged, and users of the scooters can fall and suffer injuries. |
U.S. CPSC August 19, 2008 |
Electra Bicycle Company Expands Recall of Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC January 7, 2005 |
Norco Products Ltd. Recall of Bicycle Attachment The hardware used in the assembly of the universal hitch may come loose causing the unit to separate from the lead bicycle, which could lead to a serious injury or death to the rider of the bicycle attachment. |
U.S. CPSC January 8, 2008 |
Cannondale Recalls Scalpel Mountain Bikes; Frame Failure Poses Crash Hazard The frame can break while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC May 13, 2010 |
Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash. |
U.S. CPSC November 14, 2001 |
Performance Inc. Recall Bicycle Rims The rims can crack causing the rider to lose control of the bicycle, fall, and suffer injuries. |
U.S. CPSC August 17, 2005 |
Torelli Imports Recall of Bicycle Tires The tire can separate from the wheel, resulting in a flat tire. This can cause the rider to lose control and fall. |
U.S. CPSC November 2, 2004 |
Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists. |
U.S. CPSC July 13, 2010 |
Seattle Bike Supply Recalls Bicycles and Framesets Due to Fall Hazard The bicycle fork's legs can separate from the fork crown and cause the rider to lose control, posing a fall hazard and risk of injury. |
U.S. CPSC January 9, 2007 |
Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall. |
U.S. CPSC February 10, 2005 |
Shimano American Corp. Brake Inner Cable Recall The bicycle brake cable can detach during braking, causing the rider to lose control and fall. |
U.S. CPSC October 16, 2007 |
Formula Brake USA Recalls Disc Brakes for Bicycles Due to Risk of Failure The brake's hand lever can separate, resulting in loss of braking. This can cause the rider to lose control of the bicycle, posing a risk of injury to riders. |
U.S. CPSC December 23, 2008 |
Magura USA Recalls Bicycle Suspension Forks Due to Crash Hazard The front bicycle suspension fork can break, causing the rider to crash. |
U.S. CPSC February 26, 2009 |
Salsa Bicycles Recalls Bicycles; Handlebar Stems Can Break Causing Rider to Fall The handlebar stems can crack or break, posing a fall hazard to the consumer. |
U.S. CPSC September 28, 2006 |
Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured. |
U.S. CPSC June 8, 2011 |
Quality Bicycle Products Recalls Civia Bicycle Racks Due to Fall Hazard The bicycle rack's mounting bracket can crack or break. When this happens, the rack can fall onto the bicycle's front wheel, posing a fall hazard to the rider. |
U.S. CPSC July 22, 2008 |
Electra Bicycle Company Recalls Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC January 19, 2006 |
Syntace USA Recall of Bicycle Handlebar Stems The recalled bicycle stems can crack or break under normal conditions, causing the rider to fall and suffer serious injury. |