Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC December 18, 2007	Bicycle Helmets Recalled by Specialized Due to Failing Helmet Standard The helmets fail testing required under CPSC's safety standard for bicycle helmets. This can pose a head injury hazard to riders in a fall.
U.S. CPSC October 13, 2004	Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle.
U.S. CPSC September 22, 2011	Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard.
U.S. CPSC June 22, 2006	Specialized Bicycle Components Inc. Recalls Bicycles Due to Fall Hazard The bicycle's stem has a magnesium faceplate that holds the handlebar in place. The faceplates on the recalled stems can crack allowing the handlebar to break off the bicycle, posing a serious fall hazard.
U.S. CPSC September 29, 2004	Specialized Bicycle Components Inc. Recall of Bicycles The handlebar may loosen and turn unexpectedly, which can cause the rider to lose control and fall.
U.S. CPSC February 10, 2009	Marzocchi Recalls Bicycle Forks Due to Crash Hazard and Risk of Injury during Repair The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash.
U.S. CPSC October 16, 2007	Formula Brake USA Recalls Disc Brakes for Bicycles Due to Risk of Failure The brake's hand lever can separate, resulting in loss of braking. This can cause the rider to lose control of the bicycle, posing a risk of injury to riders.
U.S. CPSC January 8, 2008	Cannondale Recalls Scalpel Mountain Bikes; Frame Failure Poses Crash Hazard The frame can break while in use, causing the rider to lose control and suffer injuries from a fall or collision.
U.S. CPSC February 10, 2005	Shimano American Corp. Brake Inner Cable Recall The bicycle brake cable can detach during braking, causing the rider to lose control and fall.
U.S. CPSC April 21, 2009	Specialized Bicycle Components Recalls Bicycles Due to Serious Fall Hazard The handlebars can break, posing a fall hazard to the rider.
U.S. CPSC April 21, 2009	Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The cable stop on the bicycle can loosen, which can cause the rider to lose control and fall from the bike.
U.S. CPSC April 8, 2010	Civia Cycles Recalls Bicycle Forks Due to Fall Hazard The bicycle fork can crack or break, posing a fall hazard to the consumer.
U.S. CPSC July 7, 2006	Felt Bicycles Announce Recall to Repair Mountain Bicycles for Brake Failure The steel brake boss can detach from the frame, causing the rider to lose control and fall.
U.S. CPSC May 5, 2005	Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries.
U.S. CPSC October 16, 2007	Procycle Group Inc. Recalls Bicycles Due to Fall Hazard The head tube can detach from the rest of the frame, posing a fall hazard to consumers.
U.S. CPSC August 2, 2005	Giant Bicycle, Inc. Recall of Bicycles The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack.
U.S. CPSC August 3, 2007	Raleigh America Recalls Bicycles; Forks Can Break Causing Loss of Control The forks can break during normal use, causing the rider to lose control, fall and suffer serious injuries.
U.S. CPSC January 9, 2007	Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall.
U.S. CPSC November 18, 2003	Gator Utility Vehicles Recalled by Deere & Company Improper crimping of the brake cables could lead to reduced braking capacity, and in some cases, to failure of the foot pedal brake.
U.S. CPSC May 19, 2009	Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash.
U.S. CPSC October 2, 2003	Park Tool USA Recalls Bicycle Floor Pump The bicycle pump can become over-pressurized with air, forcing the handle to quickly and unexpectedly rise upward, possibly injuring the user.
U.S. CPSC April 25, 2002	Bicycles Recalled by Specialized Bicycle Components Inc. The rear seatstays, the tube behind the seat that connects the rear axle to the rear shock, can break, possibly causing the rider to lose control and crash...
U.S. CPSC October 2, 2002	Performance Inc. Recall of Bicycle Handlebar Attachments Performance Inc is voluntarily recalling about 900 sets of bar ends, which are handlebar extensions used on mountain bikes. The bar ends can crack when tightened and come loose during use, which can cause riders to lose control of the bicycle and possibly suffer injuries.
U.S. CPSC March 28, 2007	Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision.
U.S. CPSC November 2, 2004	Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists.
U.S. CPSC November 12, 2010	Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders.
U.S. CPSC January 14, 2009	Giant Bicycle, Inc. Recalls Bicycles; Fork Can Break Causing Rider To Fall The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer.
U.S. CPSC January 6, 2009	Bicycles with RockShox Bicycle Forks Recalled by SRAM LLC Due to Crash Hazard The steel steerer on the forks can crack, causing the fork to detach from the bicycle frame. This can cause the rider to lose control and crash.
U.S. CPSC February 27, 2007	Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall.
U.S. CPSC July 22, 2008	Electra Bicycle Company Recalls Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders.
U.S. CPSC April 10, 2007	SRAM Corp. Recalls Bicycle Brake Caliper Sets Due to Crash Hazard The brake caliper sets could break and detach from the bicycle's fork or frame. This could cause the rider to lose control and crash.
U.S. CPSC November 8, 2004	Quality Bicycle Products Recall of Bicycle Forks The top of the Manitou bicycle suspension fork, when fully compressed, may contact the front tire, resulting in a loss of control of the bicycle and presenting a fall hazard to a bicyclist.
U.S. CPSC June 13, 2007	Cannondale Announces Recall of Mountain Bicycles; Lefty Forks Can Break Unexpectedly The forks can break during use, causing the rider to lose control of the bicycle, fall and suffer serious injuries.
U.S. CPSC May 13, 2010	Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash.
U.S. CPSC October 14, 2010	The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist.
U.S. CPSC February 10, 2009	ATVs Recalled By KTM North America Due to Brake Failure The rear brake caliper support can crack and the front brake operation can experience a loss of pressure, posing a risk of the rider losing braking and steering control and suffering injuries or death.
U.S. CPSC August 19, 2009	Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury.
U.S. CPSC December 23, 2008	Magura USA Recalls Bicycle Suspension Forks Due to Crash Hazard The front bicycle suspension fork can break, causing the rider to crash.
U.S. CPSC May 19, 2009	Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries.
U.S. CPSC September 18, 2007	REI Recalls Children's Trailer Bicycles; Can Detach from Adult Bicycle and Injure Children The children's trailer bicycle can detach from the adult bicycle, posing a fall hazard to children.
U.S. CPSC August 31, 2005	Target Recall of Back Trails Jr. Bicycle Helmets Some of these helmets do not meet CPSC safety standards for bicycle helmets, which poses a risk of riders suffering head injuries.
U.S. CPSC July 2, 2008	Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard.
U.S. CPSC May 19, 2009	Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash.
U.S. CPSC November 14, 2001	BikeE Recall Recumbent Tandem Bicycle The steerer tube on the front forks of the recumbent tandem bicycles can separate, causing the rider to lose control of the bicycle, fall, and possibly suffer serious injuries.
U.S. CPSC March 11, 2009	Electra Bicycle Company Recalls Bicycles with Front Trays; Trays Can Come Loose and Pose Fall Hazard to Riders The front tray on the bicycle can come loose and contact the front tire, posing a fall hazard to riders.
U.S. CPSC May 4, 2006	Trek Recalls Anthem C Elite Bicycle Helmets for Failing Impact Standards Consumers could suffer impact head injuries in a fall.
U.S. CPSC February 7, 2008	Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries.
U.S. CPSC August 19, 2008	Electra Bicycle Company Expands Recall of Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders.
U.S. CPSC July 8, 2009	Husqvarna Recalls Lawn Tractors; Parking Brake Failure Can Cause Loss of Control The tractor's parking brake can fail posing a loss of control hazard.
U.S. CPSC July 31, 2003	Cervelo Cycles Inc. Bicycle Fork Recall The forks on the bicycles can develop cracks near the crown area resulting in failure of the fork and posing a risk of injury to the rider.