Similar Articles |
|
U.S. CPSC January 9, 2007 |
Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall. |
U.S. CPSC January 8, 2008 |
Cannondale Recalls Scalpel Mountain Bikes; Frame Failure Poses Crash Hazard The frame can break while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC June 6, 2007 |
Cannondale Recalls Bicycles With Carbon Crankset Due to Fall Hazard The bicycle's crankset could break, posing a fall hazard to user. |
U.S. CPSC August 3, 2007 |
Raleigh America Recalls Bicycles; Forks Can Break Causing Loss of Control The forks can break during normal use, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC March 17, 2009 |
Cannondale Recalls Road Bicycles Due to Fall Hazard The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider. |
U.S. CPSC May 19, 2009 |
Cannondale Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC April 8, 2010 |
Civia Cycles Recalls Bicycle Forks Due to Fall Hazard The bicycle fork can crack or break, posing a fall hazard to the consumer. |
U.S. CPSC August 20, 2008 |
Cervelo SA Recalls Bicycle Forks Due to Fall Hazard The forks steerer can break during normal use, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC October 13, 2004 |
Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle. |
U.S. CPSC May 19, 2009 |
Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC June 30, 2010 |
Felt Bicycles Recalls Bicycles Due to Fall Hazard The bicycle's fork steer tube can break, causing the rider to lose control, fall and suffer injuries. |
U.S. CPSC August 19, 2009 |
Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury. |
U.S. CPSC February 18, 2005 |
Cannondale Bicycle Corporation Recall of Bicycle Suspension Seat Posts The seat posts may have been improperly manufactured, which could cause the seat post to fail prematurely. A failure could lead to a crack in the bicycle seat post, which may cause the rider to fall or crash. |
U.S. CPSC January 14, 2009 |
Giant Bicycle, Inc. Recalls Bicycles; Fork Can Break Causing Rider To Fall The density of the steerer tubes can cause the forks to crack and break, posing a fall hazard to the consumer. |
U.S. CPSC February 7, 2008 |
Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries. |
U.S. CPSC February 27, 2007 |
Mirraco Recalls Bicycles Due to Wheel Fork Failure Hazard The front wheel forks on these bicycles could have been welded improperly. This poses a risk that the weld could fail, and the rider could lose control and fall. |
U.S. CPSC November 5, 2004 |
Cannondale Bicycle Corp. Recall of Certain Quick-Release Handlebar Bags The plastic, handlebar-mounted, quick-release bags can fall off the bicycle while it is being ridden, causing the rider to crash. |
U.S. CPSC July 7, 2006 |
Felt Bicycles Announce Recall to Repair Mountain Bicycles for Brake Failure The steel brake boss can detach from the frame, causing the rider to lose control and fall. |
U.S. CPSC June 2, 2009 |
Bicycles Recalled by REI Due to Fork Failure The fork can separate from the steerer tube which can cause the rider to lose control, posing a fall hazard. |
U.S. CPSC September 28, 2006 |
Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured. |
U.S. CPSC February 10, 2009 |
Marzocchi Recalls Bicycle Forks Due to Crash Hazard and Risk of Injury during Repair The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash. |
U.S. CPSC July 2, 2008 |
Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard. |
U.S. CPSC November 2, 2004 |
Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists. |
U.S. CPSC July 31, 2003 |
Cervelo Cycles Inc. Bicycle Fork Recall The forks on the bicycles can develop cracks near the crown area resulting in failure of the fork and posing a risk of injury to the rider. |
U.S. CPSC January 6, 2009 |
Bicycles with RockShox Bicycle Forks Recalled by SRAM LLC Due to Crash Hazard The steel steerer on the forks can crack, causing the fork to detach from the bicycle frame. This can cause the rider to lose control and crash. |
U.S. CPSC October 16, 2007 |
Procycle Group Inc. Recalls Bicycles Due to Fall Hazard The head tube can detach from the rest of the frame, posing a fall hazard to consumers. |
U.S. CPSC January 12, 2010 |
Bicycles and Framesets Recalled By Seattle Bike Supply Due to Fall Hazard The bicycle's fork legs can separate from the fork crown and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC November 19, 2010 |
Full Speed Ahead Crank Sets Used By Numerous Bicycle Manufacturers Recalled Due To Crash Hazard If the fixing bolt is over-tightened on the non-drive crank arm, the bolt shoulder can crack or break. If this occurs, the non-drive arm can fall off the bicycle causing the rider to crash and suffer injuries. |
U.S. CPSC June 16, 2004 |
Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle. |
U.S. CPSC December 23, 2008 |
Magura USA Recalls Bicycle Suspension Forks Due to Crash Hazard The front bicycle suspension fork can break, causing the rider to crash. |
U.S. CPSC February 22, 2011 |
Felt Bicycles Recalls Bicycles Due to Fall Hazard The bicycle's fork can break, causing the rider to lose control, fall and suffer injuries. |
U.S. CPSC March 28, 2007 |
Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC November 12, 2009 |
Bicycles Recalled by Easton Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC October 16, 2007 |
Huffy Recalls Bicycles Due To Cranks Falling Off; Riders Can Lose Control of Bike The bicycle crank can unexpectedly come off, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC August 19, 2009 |
Bicycles Recalled by Nirve Sports; Stem Failure Poses Fall Hazard The bicycle stem can crack and cause the rider to lose control, posing a risk of serious injury if the rider falls. |
U.S. CPSC May 5, 2005 |
Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries. |
U.S. CPSC August 2, 2005 |
Giant Bicycle, Inc. Recall of Bicycles The rear axle on the bicycle is harder than required by the manufacturer's specification and could crack. |
U.S. CPSC January 19, 2006 |
Syntace USA Recall of Bicycle Handlebar Stems The recalled bicycle stems can crack or break under normal conditions, causing the rider to fall and suffer serious injury. |
U.S. CPSC July 7, 2010 |
Campus Cruisers Recalls Bicycles Due to Front Fork Failure The bicycle's front fork can crack or break, causing a sudden loss of steering control and posing a fall hazard to bicyclists. |
U.S. CPSC July 12, 2006 |
Shimano American Corp. Recalls Quick-Release Device for Bicycles Posing Fall Hazard The quick release skewers can unexpectedly fail or break when locked in position. When this happens the rider could lose control and fall. |
U.S. CPSC September 22, 2011 |
Specialized Bicycle Components Recalls Bicycles Due to Fall Hazard The brake component housed within the bicycle's carbon fork can disengage from the fork and allow the brake assembly to contact the wheel spokes while rotating, posing a fall hazard. |
U.S. CPSC November 14, 2001 |
BikeE Recall Recumbent Tandem Bicycle The steerer tube on the front forks of the recumbent tandem bicycles can separate, causing the rider to lose control of the bicycle, fall, and possibly suffer serious injuries. |
U.S. CPSC October 14, 2010 |
The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist. |
U.S. CPSC February 10, 2005 |
Shimano American Corp. Brake Inner Cable Recall The bicycle brake cable can detach during braking, causing the rider to lose control and fall. |
U.S. CPSC May 19, 2009 |
Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries. |
U.S. CPSC May 13, 2010 |
Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash. |
U.S. CPSC February 4, 2009 |
Bicycles with R-SYS Wheel Rims Recalled by Mavic USA Due to Crash Hazard The spokes on the bicycle's front wheel rim can break during use, posing a fall and crash hazard to riders. |
U.S. CPSC September 22, 2004 |
Performance Inc. and Supergo Inc. Recall of Bicycle Handlebars The handlebars can develop cracks that may not be visible, which can cause the handlebar to break without warning, resulting in serious injury or death. |
U.S. CPSC November 12, 2010 |
Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders. |
U.S. CPSC July 13, 2010 |
Seattle Bike Supply Recalls Bicycles and Framesets Due to Fall Hazard The bicycle fork's legs can separate from the fork crown and cause the rider to lose control, posing a fall hazard and risk of injury. |