| Similar Articles |
|---|
 |
U.S. CPSC
January 8, 2008 |
Pacific Cycle Recalls Children's Trailer Bicycles; Can Detach from Adult Bicycle and Injure Children The coupler connecting the children's trailer bike to the adult's bicycle has welds that can fail, posing a fall hazard to children.   |
U.S. CPSC
April 2, 2004 |
Pacific Cycle Inc. Recall of Mongoose 20-Inch Mountain Bicycles The rear shock absorber allows the aluminum, dual-suspension frame to flex severely, causing the frame to become unstable and break, posing the risk of injury to riders. |
U.S. CPSC
June 20, 2005 |
Nashbar Direct Recall of Bicycle Trailers The bicycle trailers can become unstable when changing directions due to incorrectly assembled hitch mechanisms, posing a risk of injury to the riders. |
U.S. CPSC
April 25, 2002 |
Trailer Bikes Recalled by InSTEP LLC The bike's universal joint system can fail, causing a rider to lose control of the bike. This poses a risk of injury to either of the two riders... |
U.S. CPSC
January 7, 2005 |
Norco Products Ltd. Recall of Bicycle Attachment The hardware used in the assembly of the universal hitch may come loose causing the unit to separate from the lead bicycle, which could lead to a serious injury or death to the rider of the bicycle attachment. |
U.S. CPSC
July 24, 2002 |
Bicycle Suspension Seat Posts Recalled by Cane Creek The seat post's cradle, which attaches to the bicycle seat, can break, posing the risk of falls and serious injury to riders. |
U.S. CPSC
June 12, 2008 |
Children's Merry-Go-Rounds Sold Exclusively at Toys R Us Recalled by Pacific Cycle Due to Fall Hazard The inner bearing on the merry-go-round can fail, causing the seat assembly to suddenly drop to the ground. This poses a fall hazard to children riding the merry-go-round. |
U.S. CPSC
October 17, 2002 |
Lida Bicycle Co. Recalls Men's Bicycles The frames of these bicycles can break apart, causing the rider to fall and suffer injuries. |
U.S. CPSC
December 9, 2010 |
Seattle Bike Supply Recalls Redline Bicycles Due to Fall Hazard The head tube can separate from the frame, causing the rider to lose control and fall. This poses a risk of serious injury. |
U.S. CPSC
November 2, 2004 |
Quality Bicycle Products Recall of Bicycle Forks The steering tube on the bicycle fork can crack or break, causing a sudden loss of steering control and causing a fall hazard to bicyclists. |
U.S. CPSC
October 13, 2004 |
Giant Bicycle Inc. Recall of Bicycles The front brake mounting tabs can break, causing the brakes to fail and the rider to lose control of the bicycle. |
U.S. CPSC
November 14, 2001 |
BikeE Recall Recumbent Tandem Bicycle The steerer tube on the front forks of the recumbent tandem bicycles can separate, causing the rider to lose control of the bicycle, fall, and possibly suffer serious injuries. |
U.S. CPSC
July 22, 2008 |
Electra Bicycle Company Recalls Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC
August 19, 2009 |
Burley Design Recalls Child Trailers Due to Risk of Injury The axle assembly's internal sleeve can loosen, causing one wheel to separate from the trailer. This poses a risk of injury to the child occupant or bike rider. |
U.S. CPSC
June 8, 2011 |
Quality Bicycle Products Recalls Civia Bicycle Racks Due to Fall Hazard The bicycle rack's mounting bracket can crack or break. When this happens, the rack can fall onto the bicycle's front wheel, posing a fall hazard to the rider. |
U.S. CPSC
November 12, 2010 |
Giant Recalls Anthem X 29er Bicycles Due to Fall Hazard The frame can crack at the junction of the seat post and top tube, posing a fall hazard to riders. |
U.S. CPSC
February 10, 2009 |
Marzocchi Recalls Bicycle Forks Due to Crash Hazard and Risk of Injury during Repair The suspension system on bikes with the recalled forks could become completely compressed and fail to return to its original position after a forceful landing. This can cause riders to lose control of the bicycle and crash. |
U.S. CPSC
October 2, 2002 |
Performance Inc. Recall of Bicycle Handlebar Attachments Performance Inc is voluntarily recalling about 900 sets of bar ends, which are handlebar extensions used on mountain bikes. The bar ends can crack when tightened and come loose during use, which can cause riders to lose control of the bicycle and possibly suffer injuries. |
U.S. CPSC
November 14, 2001 |
Performance Inc. Recall Bicycle Rims The rims can crack causing the rider to lose control of the bicycle, fall, and suffer injuries. |
U.S. CPSC
March 17, 2009 |
Cannondale Recalls Road Bicycles Due to Fall Hazard The bicycles fail to meet the federal safety standard for bicycles. Spoke protector discs, required on bicycles to prevent the bicycle chain from interfering or suddenly stopping the wheel, are missing from these bicycles. This poses a fall hazard to the rider. |
U.S. CPSC
March 11, 2005 |
CF Roark Welding & Engineering Recall of Bicycle Frames The frames on these bicycles can crack and fail during use, posing a risk of injury to riders. |
U.S. CPSC
August 19, 2008 |
Electra Bicycle Company Expands Recall of Amsterdam Bicycles; Chain Can Derail and Pose Injury Risk to Riders The interior alignment tabs of the bicycle's chainguard can be pushed against the chain causing it to derail, which poses a risk of injury to riders. |
U.S. CPSC
March 23, 2010 |
Ventus Bicycle Aerobars Recalled by 3T Cycling Srl Due to Fall Hazard The two rubber hand grips on the aerobars (handle bars) can loosen or slip off during use, posing a fall or injury hazard to the rider. |
U.S. CPSC
July 2, 2008 |
Hayes Bicycle Group Recalls Quick-Release Devices for Bicycles Due To Fall Hazard The quick release devices can unexpectedly fail or break when locked in position on the bicycle, causing the rider to lose control, which poses a serious fall hazard. |
U.S. CPSC
January 14, 2005 |
Selle Royal/fi'zi:k Recall of Bicycle Seats The plastic scuff guard underneath the front of the seat, which secures the seat rails, may crack or break causing the rider to lose control and/or fall, resulting in a serious injury. |
U.S. CPSC
May 5, 2005 |
Quality Bicycle Products Recall of Bicycle Handlebar Stems These handlebar stems can crack or break, causing the bicycle rider to fall and suffer injuries. |
U.S. CPSC
January 19, 2006 |
Syntace USA Recall of Bicycle Handlebar Stems The recalled bicycle stems can crack or break under normal conditions, causing the rider to fall and suffer serious injury. |
U.S. CPSC
March 18, 2003 |
Bicycle Helmets Recalled by MOSA Sports These helmets fail impact testing required under CPSC's Safety Standard for Bicycle Helmets, violating the Consumer Product Safety Act. Riders wearing these helmets are not adequately protected from falls, and could suffer head injuries. |
U.S. CPSC
June 16, 2004 |
Huffy Bicycle Company Recall of "Cranbrook" Bicycles Sold at Wal-Mart The handlebar could unexpectedly loosen causing the rider to lose control of bicycle. |
U.S. CPSC
September 28, 2006 |
Cervelo Cycles Inc. Announces Recall of Bicycles Due to Fall Hazard The bicycle frames can loosen or separate, causing the rider to lose control, fall and be injured. |
U.S. CPSC
May 31, 2011 |
Bicycle Helmets Recalled by Bell Sports Due to Head Injury Hazard The plastic buckle that connects the chin straps can fail, causing the helmet to come off the wearer's head. This poses a head injury hazard to riders in the event of a fall. |
U.S. CPSC
December 18, 2007 |
Bicycle Helmets Recalled by Specialized Due to Failing Helmet Standard The helmets fail testing required under CPSC's safety standard for bicycle helmets. This can pose a head injury hazard to riders in a fall. |
U.S. CPSC
August 19, 2009 |
Felt Bicycles Recalls Cyclocross Bicycles Due to Fall Hazard The bicycle's fork steerer tube can break, causing the rider to lose control and fall, posing a risk of injury. |
U.S. CPSC
May 19, 2009 |
Trek Recalls Bicycles; JD Forks Can Lose Alignment, Posing Crash Hazard The recalled bicycle's fork can lose alignment causing the front wheel to turn unexpectedly. This can cause the rider to lose control of the bicycle and crash. |
U.S. CPSC
January 9, 2007 |
Cannondale Recalls 2007 Model Road Bicycles Due to Brake Failure The bicycle's front brake can fail, causing the rider to lose control and fall. |
U.S. CPSC
July 13, 2010 |
Seattle Bike Supply Recalls Bicycles and Framesets Due to Fall Hazard The bicycle fork's legs can separate from the fork crown and cause the rider to lose control, posing a fall hazard and risk of injury. |
U.S. CPSC
May 19, 2009 |
Norco Recalls Bicycle Frames Due to Crash Hazard The bicycle frame can crack and separate, causing a rider to fall from the bicycle and suffer injuries. |
U.S. CPSC
May 9, 2002 |
Rocky Mountain Bicycles Recalls Mountain Bicycles The chainstay that holds the rear wheel in place can fail, causing the rear wheel to separate from the bicycle. This can cause the rider to lose control and crash... |
U.S. CPSC
August 22, 2002 |
Mountain Bicycles Recalled by Answer Products Inc. The spring and adjuster can separate from the suspension fork and strike the rider, causing injuries. |
U.S. CPSC
November 5, 2004 |
Cannondale Bicycle Corp. Recall of Certain Quick-Release Handlebar Bags The plastic, handlebar-mounted, quick-release bags can fall off the bicycle while it is being ridden, causing the rider to crash. |
U.S. CPSC
August 28, 2002 |
Bicycle Tire Floor Pumps Recalled by Todson Inc. The pressure gauge lens can separate from the pump and strike a consumer, causing injury. |
U.S. CPSC
July 31, 2003 |
Cervelo Cycles Inc. Bicycle Fork Recall The forks on the bicycles can develop cracks near the crown area resulting in failure of the fork and posing a risk of injury to the rider. |
U.S. CPSC
March 28, 2007 |
Dynacraft Recalls Bicycles Sold Exclusively at Target Due to Frame Failure The bicycle frame can crack while in use, causing the rider to lose control and suffer injuries from a fall or collision. |
U.S. CPSC
October 16, 2007 |
Huffy Recalls Bicycles Due To Cranks Falling Off; Riders Can Lose Control of Bike The bicycle crank can unexpectedly come off, causing the rider to lose control, fall and suffer serious injuries. |
U.S. CPSC
May 13, 2010 |
Niner Bikes Recalls Bicycle Frame Due to Crash Hazard A welding deficiency can cause the bicycle frames to crack along the welds of the front triangle of the bicycle. This can cause the rider to lose control and crash. |
U.S. CPSC
February 4, 2009 |
Bicycles with R-SYS Wheel Rims Recalled by Mavic USA Due to Crash Hazard The spokes on the bicycle's front wheel rim can break during use, posing a fall and crash hazard to riders. |
U.S. CPSC
October 14, 2010 |
The Hive Announces Recall to Repair Revl Carbon Road Bicycle Brakes Due to Fall Hazard The cable clamping area of the bicycle brakes can crack over time, causing the brakes to fail. This could pose a fall or crash hazard to the cyclist. |
U.S. CPSC
October 2, 2003 |
Park Tool USA Recalls Bicycle Floor Pump The bicycle pump can become over-pressurized with air, forcing the handle to quickly and unexpectedly rise upward, possibly injuring the user. |
U.S. CPSC
July 25, 2005 |
VisionTech USA, Inc. Recall of Bicycle Aero Bars The centerpiece of these bicycle aero bars can crack or break, causing the bicycle rider to lose control and crash. |
U.S. CPSC
February 7, 2008 |
Trek Recalls Girls Bicycles Due To Frame Failure The bicycle's frame can break during use, causing the rider to lose control and suffer injuries. |
