Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

National Defense March 2014 Yasmin Tadjdeh	3D Printing Promises to Revolutionize Defense, Aerospace Industries While used for many novel purposes, the defense and aerospace industry is eyeing 3D printing as a way to cut costs and improve efficiency.
National Defense November 2015 Jon Harper	Military 3D Printing Projects Face Challenges Additive manufacturing, also known as 3D printing, has the potential to revolutionize the U.S. military's logistics system. But numerous hurdles stand in the way of that dream becoming reality, experts said.
National Defense October 2014 Yasmin Tadjdeh	Navy Beefs Up 3-D Printing Efforts With New 'Print the Fleet' Program At the Harsh Environment Lab in Virginia Beach, Navy scientists and engineers are developing cutting edge technologies, including 3-D printing.
National Defense June 2014 Valerie Insinna	Military Scientists Developing New 3-D Printing Applications With the advent of cheaper printers and better software, the military's use of 3-D printing is skyrocketing.
National Defense March 2010 Stew Magnuson	Future Remotely Piloted Aircraft Will Do More Than Surveillance Military leaders are beginning think about concepts for the third-generation UAVs. In the future, they will want the drones to do a lot more than peer down on adversaries.
National Defense July 2012 Dan Parsons	Teaming Pilots With Drones Hampered By Technology The Army recently found that the most cost effective solution to replace its scout helicopters was a mix of traditional rotary wing platforms and unmanned aerial vehicles flying alongside to cover more ground in a single mission.
National Defense September 2012 Eric Beidel	Contractor Hits 'Print,' And Creates Drone The 3-D printing process, also known as additive layer manufacturing, is based on the principles of rapid prototyping and creates products out of fine powder metal (such as titanium, stainless steel and aluminum), nylon or carbon-reinforced plastics.
National Defense May 2012 Stew Magnuson	Regulatory, Technological Hurdles Stand In Way of Domestic Drone Mandate If Congress gets its way, by Sept. 30, 2015, unmanned aerial vehicles will be seamlessly flying in national airspace alongside passenger jets, military aircraft and single-prop general aviation Pipers.
National Defense December 2013 Dan Parsons	Debate Continues Over Role of Simulators in UAS Pilot Training There still is no agreed upon method of training new UAS pilots -- and keeping seasoned operators proficient -- for future conflicts where U.S. drones will be flying in contested airspace.
National Defense May 2011 Grace V. Jean	Marine Special Operators Rely Heavily on Hand-Launched Drones The newest component of U.S. Special Operations Command has quickly embraced drone technology, particularly the small hand-launched aircraft that weigh less than 20 pounds and fly at speeds under 100 knots.
National Defense February 2014 Dan Parsons	Drones Over U.S. Soil Still Years Away, Despite Congressional Mandate The Federal Aviation Administration has less than a year left to meet its congressionally mandated 2015 deadline for clearing drones to fly over U.S. soil.
National Defense July 2011 Eric Beidel	Efforts Under Way to Harden Unpiloted Aircraft for Contested Airspace Military leaders are beginning to wonder how Predators, Reapers, Hunters, Shadows and the rest will perform in unfriendly skies.
National Defense January 2016 Yasmin Tadjdeh	Defense Industry Developing Systems to Defeat Enemy Drones Experts and company executives envision a future where new technology employed by the military or government agencies could spot rogue or hostile drones, identify them and even commandeer or stop them mid-air.
National Defense November 2014 Yasmin Tadjdeh	Small Spy Drones to Expand Troops' Eyes And Ears on Battlefield Despite sliding defense budgets, the collection of this critical intelligence, surveillance and reconnaissance data will continue to be a priority for the armed services, experts told National Defense.
National Defense May 2015 Valerie Insinna	Drone Makers Hope to Corner Burgeoning Global Market Experts predict manufacturers will encounter an increasingly crowded playing field over the next decade, as more companies begin producing ever more advanced systems.
eCFO June 2001 John Edwards	Absolutely Fab 3D printing, also known as desktop fabrication, is already being used by engineering and manufacturing companies to create detailed prototypes. And a variety of organizations, including the US Army, are attempting to push 3D printer technology to the next level...
National Defense August 2008 Sandra I. Erwin	Drones in The Military: Infatuation or True Love? Unmanned aircraft will remain an important component in the aerospace industry, but the military is still uncertain how to integrate them into their plans.
National Defense October 2010 Eric Beidel	Uncertainty, Challenges Mark Future For Military's Unpiloted Aircraft The use of unmanned aerial systems in Iraq and Afghanistan has shown that they are invaluable in uncontested airspace. But questions remain about how the current generation of U.S. drones would fair in unfriendly skies.
National Defense May 2008 Breanne Wagner	Worries About Mid-Air Collisions Keep Civilian Drones Grounded The agency that controls the domestic airspace, the Federal Aviation Administration, said unmanned aircraft are not yet ready to conduct realistic missions.
National Defense February 2015 Sarah Sicard	UAS Degree Programs Growing with Market By 2025, there could be more than 100,000 jobs in the unmanned aerial systems industry, according to a 2013 economic impact report performed by the Association for Unmanned Vehicle Systems International.
National Defense October 2007 Breanne Wagner	Civilian Market for Unmanned Aircraft Struggles to Take Flight As the demand for unmanned aerial vehicles in Iraq and Afghanistan continues to increase, government agencies and contractors are clamoring to use aerial drones for domestic missions in U.S. national airspace.
IEEE Spectrum January 2011 David Schneider	Drone Aircraft: How the Drones Got Their Stingers Unmanned aerial vehicles come of age
National Defense February 2012 Dan Parsons	Air Force F-35s, Drones May Square Off in Budget Battle Unmanned aerial vehicles have become a potent portion of the U.S. Air Force inventory and an indispensable weapon in the global war on terror.
National Defense May 2014 Valerie Insinna	Military, Industry Racing to Create Sense-and-Avoid Systems Congress has set a 2015 deadline for the Federal Aviation Administration to phase drones into civil airspace, but one of the technologies needed to safely operate unmanned aircraft won't be ready until at least a year later.
National Defense March 2011 Eric Beidel	Eyes of Army Drones Multiply, Open Wide Even though unmanned aircraft have generally been spared from the conversation about the Pentagon's spending cuts, Army officials want to increase ISR capabilities without adding personnel or aircraft.
National Defense June 2014 Sandra I. Erwin	Shine Starting to Wear Off Unmanned Aircraft Unmanned aviation has enjoyed a decade-long honeymoon, during which the military poured billions of dollars into new drone fleets and the media ballyhooed their deadly precision in combat.
National Defense February 2012 Stew Magnuson	Safety Concerns Still Blocking Unmanned Aerial Vehicles From National Airspace The Pentagon, along with the Department of Homeland Security and NASA, has been negotiating with the Federal Aviation Administration for years to allow unmanned aerial vehicles to gain regular access to the national airspace.
National Defense October 2015 Lonardo & Conner	Additive Manufacturing Provides Agility for Defense Contractors Military commanders at all levels rely on the U.S. industrial base to provide forces with superior platforms that are operationally available.
National Defense July 2012 Eric Beidel	Controversies Do Little to Temper U.S. Employment of Armed Aerial Drones With the war in Iraq over and the one in Afghanistan winding down, the fight against terrorists will become more decentralized, leaving experts to ponder where the United States will next employ its armed drones.
National Defense May 2013 Dan Parsons	Worldwide, Drones Are in High Demand The U.S. military may be the most high-profile owner and operator of unmanned aircraft, but it is far from the only customer of the controversial vehicles.
National Defense July 2006 Sandra I. Erwin	Surveillance Drone Operators Find Ways to Outsmart Enemy A burgeoning fleet of unmanned aircraft is among the Army's key weapons against Iraq's insurgency. But the technology alone is not enough to gain an edge over this enemy, experts say.
National Defense May 2015 Allyson Versprille	Small Off-the-Shelf Drones Causing Alarm In Security Circles Small, readily available unmanned aerial systems pose an increased risk to national security as the technology grows more capable, a panel of experts testified before Congress.
National Defense August 2015 Yasmin Tadjdeh	More Sophisticated, Autonomous Unmanned Aircraft on the Horizon In the future, unmanned aerial systems will hold even more utility as they become faster, stealthier and more autonomous, experts said. At the same time, they will become more accessible to foreign countries and terrorist groups around the world.
National Defense February 2011 Eric Beidel	Army Pilots: Flying Drones Tougher Than It Looks Unmanned aircraft operations can be dangerous, aviators contend. Bad weather, makeshift runways and close calls with friendly aircraft are among the hazards that put missions at risk.
Chemistry World June 25, 2013	Press P to print Much of the headline-grabbing scientific 3D printing has been in biotechnology, where body parts have been printed using biological polymers. But why stop at replacement body parts? Why not go beyond biology and use 3D printing to enhance the human body?
The Motley Fool June 7, 2011 Dan Radovsky	Drones: More Than a Buzzword for Boeing Boeing's gamble in unmanned aircraft may pay off ... one day.
National Defense December 2011 Stew Magnuson	Coast Guard Hasn't Given Up on Long Delayed Unmanned Aerial Vehicle Plans The case for having long-endurance, over-the-horizon surveillance capabilities was made in the early years of the Deepwater modernization program.
National Defense July 2012 Antoine Martin	Promising Outlook for Navy's Unmanned Aviation The U.S. Navy has ambitious plans to deploy new families of unmanned aircraft over the next decade.
National Defense July 2011 Grace V. Jean	Remotely Piloted Aircraft Fuel Demand for Satellite Bandwidth The communications-hungry drones consume large amounts of bandwidth to pipe battlefield video feeds and other sensor data back to intelligence centers and to forces on the ground.
National Defense May 2013 Dan Parsons	3D Printing Provides Fast, Practical Fixes While most 3D printing applications have been whimsical rather than practical -- the Army's mobile lab is producing real-world objects that are saving lives in war zones.
National Defense January 2009 Grace V. Jean	Drone Operators Ask Industry For 'Open' Systems The ground-based equipment that is used to fly unmanned combat aircraft is not adequate to handle the demanding missions of current conflicts, operators say.
National Defense June 2011 Stew Magnuson	L-3 Link, University Establish Training Center for Domestic Drone Pilots L-3 Link Simulation & Training and the University of North Dakota in June are opening an unmanned aerial systems training center at Grand Forks Air Force Base, N.D.
National Defense November 2013 Stew Magnuson	Proliferation of Cheap 3-D Printers Raises Security Concerns Three-D printing, which is in its infancy, will fundamentally change the way products are distributed, just as MP3 files changed the way people consume music. These products could be guns or other illegal objects
Fast Company Neal Ungerleider	FAA Task Force Issues New Drone Guidelines Registering drone operators -- and not the aircraft they're flying -- will help the Transportation Department identify flyers who violate FAA regulations.
National Defense October 2005 Harold Kennedy	Surveillance Needs Fuel Demand for Unmanned Vehicles Currently, there are nearly 1,000 robotic vehicles being used for surveillance and reconnaissance, especially in maritime areas in the Central Command theater of operations, and combatant commanders keep asking for more.
Wired June 2005 Noah Shachtman	Attack of the Drones Flying bots rule the skies in combat zones around the globe. Now the battle is on between the joystick jockeys and the fighter jocks.
National Defense July 2009 Grace V. Jean	Unmanned Systems Could Fly Majority of Air Force Missions Surveillance drones are becoming mainstream and the Air Force is even exploring a broader range of future missions for unmanned systems.
The Motley Fool June 26, 2011 Dan Radovsky	One Growth Company to Get In On Now The future in 3-D printing is now. Don't miss the boat.
The Motley Fool August 27, 2009 Rich Smith	Hey! Who's Flying this Thing? Special Report Newsflash: Mainstream media discovers unmanned aerial vehicles or drone aircraft.
National Defense December 2011 John Edwards	Remote Controllers -- Unmanned Vehicle Operators Require Diversity of Skills In today's era of tighter budgets and ever more sophisticated flight control technologies, the military is increasingly relying on remotely piloted, unmanned vehicle systems for a wide range of tasks, including intelligence gathering, remote surveillance and target applications.