Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC August 7, 2008	Progress Lighting Recalls Indoor Light Fixtures; Lights Can Unexpectedly Fall Posing an Impact Hazard The ceiling-mount assembly that supports the light fixture can fail, causing the fixture to unexpectedly fall and injure consumers.
U.S. CPSC March 19, 2008	Progress Lighting Recalls Ceiling-Mounted Outdoor Light Fixtures; Lights Can Fall Off Mounting and Injure Consumers A weld that affixes a mounting bracket to the ceiling pan can fail, which can cause the fixture to fall and injure nearby persons.
U.S. CPSC July 22, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Fire Hazard A thermal protector could be missing from the lighting fixtures, posing a risk of overheating and fire.
U.S. CPSC August 27, 2008	Indoor Lighting Fixtures Recalled by Lithonia Lighting Due to Impact Hazard The glass reflector can separate from the fixture and fall, posing a risk of injury to consumers below the fixture.
U.S. CPSC February 10, 2004	Fluorescent Light Fixtures Recalled by Progress Lighting The lamp holders on the fluorescent lights can overheat, causing the fixture to melt or burn, presenting a fire hazard.
U.S. CPSC December 28, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Progress Lighting Due To Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: 8009-60, 8010-60 or 8011-60.
U.S. CPSC February 15, 2005	Sea Gull Lighting Products Recall of Ceiling Light Fixtures Due to a manufacturing defect in a component part, the light fixture could fall and strike a person beneath the light fixture. The fixture also poses a laceration risk if the lamp breaks.
U.S. CPSC May 22, 2003	Ceiling Light Fixtures Recalled by Sea Gull Lighting Inc. The wiring in the lights can short, posing a fire hazard to consumers.
U.S. CPSC March 3, 2010	Outdoor Lighting Fixtures Recalled by American Electric Lighting Due to Shock Hazard Improper wiring in the light fixtures poses a shock hazard to consumers.
U.S. CPSC October 9, 2007	Fluorescent Ceiling Light Fixtures Sold Exclusively at Home Depot Recalled by Lithonia Lighting Due to Shock Hazard A wire inside the light fixture could be loose, posing an electrical shock hazard to consumers.
U.S. CPSC March 11, 2005	Lithonia Lighting Recall of Indoor HID Light Fixture Cords The cord of the light fixture can drip plasticizer fluid onto the light fixture, which can degrade the acrylic reflector, causing it to crack and fall. Falling pieces of acrylic can injure a person below the fixture.
U.S. CPSC August 15, 2006	Gotham Light Fixtures Recalled Due to Risk of Falling Parts The lower portion of the reflector/trim assembly could detach and fall from the ceiling, striking consumers.
U.S. CPSC May 23, 2006	Light Fixtures Recalled After Reports of Units Falling Two nuts in a mounting mechanism of these light fixtures were not attached. The fixture could detach, fall and possibly hit consumers.
U.S. CPSC September 23, 2008	Gotham Lighting Recalls Compact Fluorescent Recessed Ceiling Lights; Can Fail to Work in an Emergency The relay on the backup battery of the lights could be programmed incorrectly and prevent the lights from functioning in an emergency.
U.S. CPSC April 30, 2010	Chain Sets Sold with Commercial Light Fixtures Recalled by Cooper Lighting Due to Injury Hazard An "S" hook on the chain connecting the fixture to the ceiling can straighten when subjected to high impact forces, resulting in the light fixture falling. This poses an injury hazard to consumers.
U.S. CPSC March 29, 2004	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC November 6, 2001	Progress Lighting Recall Fluorescent Lights The lights are improperly wired, posing a fire hazard.
U.S. CPSC March 8, 2005	Lithonia Lighting Recall of Indoor HID Light Fixtures A component in the light fixture can leak fluid, which can degrade the acrylic lenses and reflectors, causing them to crack and fall. Falling pieces of acrylic can injure someone below the fixture.
U.S. CPSC December 29, 2006	Trim Assembly Kits for Recessed Light Fixtures Recalled By Prescolite Inc. Due to Risk of Falling Parts Heat from the light bulb can cause the fixture's plastic trim to soften and melt, causing the trim and lens to fall. This can result in laceration injuries to nearby consumers. Models were made in China and have model numbers: TL60 and TL62.
U.S. CPSC October 25, 2006	Streetlights Recalled by Beacon Products Due to Injury Hazard to Passersby The lighting fixtures could fall from their lamp posts due to a problem with the coupling system used to secure them. This poses a risk of injury for persons beneath the fixtures.
U.S. CPSC August 9, 2011	Emergency Exit Signs Recalled by Best Lighting Products Due to Failure to Illuminate The fixtures can malfunction and fail to illuminate in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in the event of an emergency.
U.S. CPSC November 4, 2004	Cordelia Lighting Recall of Hampton Bay Light Fixtures Sold at Expo Design Centers The decorative metal rings on the ends of the lamp fixtures can detach. Consumers could suffer minor burns if they touch the hot rings.
U.S. CPSC November 21, 2007	Cooper Lighting Recalls Fluorescent Shop Lights Due to Electrical Shock Hazard When the two prongs on the plug's electrical cord are touched simultaneously while lamps are installed, the light can pose an electric shock hazard to consumers.
U.S. CPSC August 16, 2006	Tu-Wire(R) Dimming Ballasts Used With Compact Fluorescent Lights Recalled for Shock Hazard If not properly grounded, these ballasts can present a risk of electric shock to persons who come in contact with the ballast or with a light fixture that incorporates the ballast.
U.S. CPSC August 12, 2008	Cooper Lighting Recalls Emergency and Exit Lights; Could Fail to Stay Illuminated in an Emergency The lights can malfunction and not stay illuminated in the event of a power failure. This could result in a failure to provide adequate lighting to guide building occupants to an exit in an emergency.
U.S. CPSC January 6, 2011	Quoizel Inc. Recalls Outdoor Hanging Lantern Due to Fall Hazard The glass lantern can separate from the top support ring and fall, injuring people who are nearby.
U.S. CPSC August 20, 2009	Pensi Ceiling Fans Recalled by The Modern Fan Co. Due to Fall and Injury Hazard The internal coupler that connects the down rod assembly to the motor can break and cause the fan to fall from the ceiling, posing an injury hazard to consumers.
U.S. CPSC March 1, 2005	Ginger Recall of Bathroom Light Fixtures The glass shades can separate from the light fixture, posing a risk that a consumer could be cut by the broken glass if the shade were to fall and break.
U.S. CPSC May 9, 2007	Cooper Lighting Emergency Lights Recalled, Could Fail to Illuminate in an Emergency A circuit board in the light could malfunction, preventing the lights from illuminating in the event of a power failure.
U.S. CPSC February 10, 2009	Catalina Lighting Recalls Halogen Clamp Lamps Due to Fire and Burn Hazard; Sold Exclusively At Staples Stores The UV glass lens on the lamp can crack, exposing the halogen bulb, posing a fire and burn hazard.
U.S. CPSC August 4, 2004	Osram Sylvania Products Recall of Decorative Light Bulbs The glass bulb can separate from its base and break during use. The broken glass can present a laceration injury to consumers, the hot broken bulb can present a burn injury to consumers, and an exposed bulb filament can present a shock hazard if handled while power remains applied to the fixture.
U.S. CPSC December 8, 2004	Technical Consumer Products Inc. Recall of Fluorescent Light Bulbs The bulbs can overheat and spark, posing a burn hazard to consumers.
U.S. CPSC November 18, 2008	Lithium-Ion Batteries Used with Bicycle Lights Recalled By DiNotte Lighting Due to Burn Hazard A loose wiring connection and improper venting can cause the battery to overheat, posing a burn hazard to consumers.
U.S. CPSC November 16, 2006	Desk Lamps Sold at Office Depot Recalled for Shock Hazard The sheath that protects the electrical cord can become improperly aligned during lamp assembly, posing a shock hazard to consumers.
U.S. CPSC May 20, 2008	The Home Depot Recalls Candle Holders Due to Fire Hazard Sunlight passing through the glass portion can cause nearby flammable materials to ignite, posing a fire hazard.
U.S. CPSC November 30, 2004	Classic Sport Companies Inc. Recall of Table Soccer Games The lighting structures may spark if the tube lights are not properly installed, posing a fire hazard.
U.S. CPSC December 18, 2003	Guth Lighting Recall of Lighting Fixtures The lamp can fall out of the lamp socket and strike somebody standing or walking beneath the light fixture, posing a laceration risk if the lamp breaks.
U.S. CPSC September 25, 2003	Ceiling Fans Recalled by Vaxcel International Co. Ltd. About 80 of these units were improperly assembled with a metal sleeve that could cause exposed wiring. If this occurs, consumers are at an increased risk of receiving an electrical shock during installation or removal.
U.S. CPSC August 3, 2007	LED Lights Recalled by Plan 9 Due to Fire Hazard The circuit board in the lights can overheat, posing a risk of fire.
U.S. CPSC December 11, 2008	Commercial Frozen Food Merchandisers Recalled by Tyler Refrigeration Due to Fire Hazard Incomplete/incorrect light bulb installation can result in electrical arcing in the fixture, which can pose a fire hazard to consumers.
U.S. CPSC July 3, 2008	Outdoor Canopies Sold Exclusively at BJ's Wholesale Club Recalled by Wanda Technology Due to Fire Hazard The canopies fail to comply with a voluntary flammability standard could pose a fire hazard to consumers.
U.S. CPSC October 25, 2007	Children's Metal Jewelry Recalled By WeGlow International Due to Risk of Lead Exposure The recalled jewelry contains high levels of lead. Lead is toxic if ingested by young
U.S. CPSC June 15, 2004	Basler Electric Co. and Lutron Electronics Recall of Power Supply Units The power supply, if overloaded, can overheat, posing a fire hazard to consumers.
U.S. CPSC February 16, 2007	Currey & Company Recalls Lamps Due to Fire Hazard The light sockets on these Thomasville Table and Floor Lamps have a defect that poses electrical shock and fire hazards.
U.S. CPSC April 24, 2003	DesignPac Inc. Recall of Oil Lamps The glass wick holder can shatter when lit, posing a fire hazard.
U.S. CPSC December 12, 2006	Emerson Electric Co. Recalls Ceiling Fans for Injury Hazard from Falling Blades The brackets holding the fan blades can break, causing the blade to detach. Falling pieces can hit and injure bystanders.
U.S. CPSC August 22, 2008	Power Light Modules Recalled by GCI Technologies Due to Fire and Burn Hazards Internal wiring in the module's circuit boards is incorrectly installed, posing a risk of an electrical fire and burn hazards to consumers.
U.S. CPSC March 25, 2009	Holiday Lights Recalled by Four Star Group USA Due to Fire Hazard; Sold Exclusively at Safeway Stores Electrical wiring in the lights can overheat, posing a fire hazard to consumers.
U.S. CPSC March 17, 2004	APA Marketing Inc. Recall of Home Entertainment Wall Units The control box for the touch dimmer lighting mechanism can overheat, posing a fire hazard to consumers.
U.S. CPSC January 10, 2008	Torchiere Lamps Recalled By L G Sourcing Due to Fire Hazard; Lamps Sold Exclusively At Lowe's Stores A short circuit in the lamps' wiring can pose a fire hazard to consumers.