Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

Military & Aerospace Electronics March 2007 John McHale	Networking-on-the-Move Capability Highlights Content at 2007 Military Technologies Conference U.S. DOD and industry experts will discuss the challenges, as well as the lessons learned and potential solutions to enabling networking on the move for today and tomorrow's conflicts, at the Military Technologies Conference.
Military & Aerospace Electronics May 2007 John Keller	GEIA Lead-Free-Solder Guidelines to be Released by Early 2008 Raytheon, working under the auspices of the Government Electronics Industries Association (GEIA), will release its guidelines on performance and qualification testing for lead-free solder during the first quarter of 2008
Military & Aerospace Electronics February 2007 John McHale	Thermal-management challenges highlight Military Technologies Conference 2007 U.S. Department of Defense and industry experts to discuss thermal and power management at the Military Technologies Conference (March 27 and 28, 2007) in Boston.
Military & Aerospace Electronics April 2009 J.R. Wilson	Lead-Free RoHS on Military Electronics Procurement Worldwide environmental requirements to use lead-free solder continues to squeeze military system designers.
Military & Aerospace Electronics September 2006	Lead-Free Solder Regulation Unfairly Given a Bad Name for Military Applications Does lead-free solder really not provide the reliability needed for military applications.
Military & Aerospace Electronics July 2006 John Keller	Could RoHS Mean the End of COTS as we Know it? The electronics industry's move away from using solders containing lead is setting up a clash between private industry, both here and in Europe, and the U.S. military that may well lead to the end of the COTS era as we have come to know it.
Military & Aerospace Electronics September 2006 Mike Murphy	Lead-Free Solder Regulation Unfairly Given a Bad Name for Military Applications Letter to the editor: Why doesn't nonlead solder work for the military?
Military & Aerospace Electronics August 2006 Courtney E. Howard	Electronics Designers Grapple with Lead-Free Solder Guidelines The European Union WEEE/RoHS directives cause concern in the military and aerospace market as to the availability and reliability of lead-free electronic components.
Military & Aerospace Electronics January 2008 John McHale	COTS Integration and Acquisition is Focus of Military & Aerospace Electronics Forum Dr. Stephen M. Jarrett, chief technologist of the U.S. Navy's Space and Naval Warfare Systems (SPAWAR) will discuss solutions to COTS integration challenges and other issues facing defense COTS electronics designers.
Military & Aerospace Electronics July 2007 Keith Gurnett & Tom Adams	RoHS One Year Later: Supplies of Leaded Solder Drying up When the EU's Restriction of Hazardous Substances legislation took effect one year ago, it marked the beginning of the end for most electronics assemblies containing leaded solder, and the beginning of a nearly universal franchise for lead-free solders.
Military & Aerospace Electronics December 2004	Lead-Free Movement Complicates Electronic Parts Traceability Electronics manufacturers at all levels are increasingly concerned with the implications of lead-free processing. The real challenge in military applications will be to ensure that all components are clearly identified at all stages as lead or lead-free.
Military & Aerospace Electronics October 2007 Gurnett & Adams	The danger of hybrid-solder boards If a hybrid board fails in military or aerospace applications, the consequences could be severe.
Military & Aerospace Electronics May 2007 John McHale	Military Technologies Conference a Hit Among Attendees Lead-free issues, International Traffic in Arms Regulations (ITARs), and thermal management were three important issues discussed at this year's MTC conference.
National Defense September 2009 Jean & Erwin	Higher Prices and More Failures Predicted for Defense Electronics All electronics from Europe are required to be made with lead-free solder. However, U.S. defense and aerospace users have documented over $1 billion of damage resulting from failure of the lead-free electronics.
Military & Aerospace Electronics October 2005 John Keller	Lead-Free Solder: A Train Wreck in the Making Companies are walking away from leaded solders because they see their economic futures elsewhere, driven primarily by the European program to limit the use of lead. Where this trend places the military, at least in the short term, is in a lot of trouble.
Military & Aerospace Electronics April 2008 Courtney E. Howard	Lead-Free Issues Continue to Plague Mil-Aero Market, Says DMEA Engineer The lead-free movement has a greater impact on the U.S. Department of Defense (DOD) than the commercial market.
Military & Aerospace Electronics January 2008 Gurnett & Adams	Achieving Reliability with Lead-Free Solders Strategies for improving the characteristics, behavior, and reliability of lead-free solders.
Military & Aerospace Electronics March 2008 Gurnett & Adams	Achieving Reliability with Lead-Free Solders Experts believe lead-free solders can achieve the same high levels of component and system reliability that military and aerospace users have become accustomed to during 50 years of tin-lead solder use.
Military & Aerospace Electronics December 2008 Tom Adams	Standard Gives Guidance for Alloy Conversion Using Hot-Solder Dip Military and aerospace received allowance to continue to use lead solder. However, the elimination of lead soldered components by electronics companies has left the military and aerospace unable to buy components on the market.
Military & Aerospace Electronics October 2005 Gurnett & Adams	Can ISO Standards Smooth the Lead-Free Transition? In the long run, the global legislative demand being made by lead-free rules and the European Reduction of Hazardous Substances rule in the consumer world will benefit military and aerospace users.
Military & Aerospace Electronics September 2005 Estro Vitantonio	Military and aerospace component manufacturers learn from the commercial market Military and commercial component suppliers traditionally have done business in different ways. Not so much anymore, however. And the changes are all for the better.
Military & Aerospace Electronics January 2008 Chris Reynolds	Tin-Lead Components Alive and Well in the Military Sector Contrary to popular opinion, tin-lead termination devices are alive and well, and many devices are readily available from stock.
Military & Aerospace Electronics December 2005	Letters to the Editor Tin-whisker issues deserve to be on the front burner... No-lead solder problems continue to plague industry...
Military & Aerospace Electronics January 2007	Cobar offers CobarCore lead-free solder This solder delivers excellent wetting, bright solder joints, and clear, noncorrosive residues.
Military & Aerospace Electronics August 2008 Tom Adams	Revised moisture sensitivity standard includes lead-free components The revised standard, J-STD-020D, is used by component manufacturers to expose a given component type to a specific temperature/humidity environment and then test the component.
Military & Aerospace Electronics December 2007 John McHale	Deputy Assistant Secretary of Defense Ronald c. Jost to Keynote Military & Aerospace Electronics Forum Conference in March Session topics include: COTS integration panel discussion, COTS acquisition, software-defined radio and the Joint Tactical Radio System program, IPv6 and its influence on military systems, information assurance, and more.
Military & Aerospace Electronics February 2008 John McHale	JTRS Program Executive to Lead SDR Discussion at Military & Aerospace Electronics Forum One of the chief architects of the U.S. military's Joint Tactical Radio System (JTRS) program will headline the military communications session of the Military & Aerospace Electronics Forum conference and trade show.
Military & Aerospace Electronics December 2008 Keith Nardone	Combating the Military's Tin Whisker Threat: No-Lead Strategies for Power Products Global transition to lead-free material has raised concerns regarding reliability of electronic interconnects, especially for the military and aerospace community.
Military & Aerospace Electronics April 2008 Courtney E. Howard	Thermal Management a Challenge for Designers of Future Military Aircraft Today's aviation, vetronics, and other military-aero applications require more power, but have less space. This contributes to higher thermal loads and less opportunity to drive the heat out.
Military & Aerospace Electronics March 2008 John McHale	Managing Thermal Efficiency of Modern Processors Discussed at Military & Aerospace Electronics Forum Current and future-generation processors are creating escalating thermal demands on military designers.
Military & Aerospace Electronics August 2007 Courtney E. Howard	The Cost of Compliance: A RoHS Retrospective The military and aerospace industry continues to grapple with lead-free challenges a year after the European Union restricts the use of hazardous substances.
Military & Aerospace Electronics December 2007 John Keller	Defense Executive: News for Defense Industry Managers Defense Executive will inform senior managers in the military and aerospace industries about the latest and most timely information on emerging markets, contract awards, contracting opportunities and more.
Military & Aerospace Electronics April 2010	Irvine Sensors, Optics 1 to Deliver Thermal Imaging Systems to Naval Surface Warfare Center The thermal imagers are for clip-on thermal imager (COTI) systems that Optics 1 is building for the U.S. Naval Surface Warfare Center.
Military & Aerospace Electronics August 2004 John Rhea	New Approach to Missile Electronics: 3-D Packaging Navy engineers are working on a three-dimensional approach to weapons technology, in which designers embed the components inside a printed circuit-card assembly to handle higher G forces and thermal stresses than are possible with conventional technology.
Military & Aerospace Electronics July 2008 Gurnett & Adams	Farewell to Surface Mount? The idea of placing components inside the printed circuit board (PCB), rather then on the surface, has come and gone several times. Today, however, the concept is re-appearing with more promise and credibility than it has before.
Military & Aerospace Electronics April 2008 John Keller	MAEF 2008: The Show is Back The 2008 Military & Aerospace Electronics Forum conference and exhibition was held last month.
Military & Aerospace Electronics April 2005 Coble & Dela Garza	Can optoelectronics go from practical to tactical? Many automakers have already begun to deploy optoelectronics into their automotive systems in sensors, dashboard displays, motion and position sensing. Such technologies may find their way into military and aerospace products.
Military & Aerospace Electronics June 2005 John Keller	Industry Scores a Win with Military Technologies Conference We sat down with a panel of experts representing the most important corners of our industry. Their insights led us to craft three separate conference segments: sensor fusion for command and control; transformational communications, and directed-energy systems.
Military & Aerospace Electronics February 2006 John McHale	A Message from the Editor The Military Technologies Conference will zero in on the hottest and most promising technologies that will make the network-centric American fighting force a reality.
Military & Aerospace Electronics January 2005	The elusive military optoelectronics market Optical technology is more important for military and aerospace applications today than ever before
Military & Aerospace Electronics November 2004	Military Technologies Conference March 15-16 Will Center on Military Transformation The conference's three modules reflect three of the most pivotal technologies for leading the U.S. military into the 21st century and for transforming it from an industrial-age to an information-age force.
Military & Aerospace Electronics May 2009	Show Products Product highlights for the avionics and military shows in San Diego, June 1-2, 2009.
Military & Aerospace Electronics March 2010 John Keller	The DOD Budget is Out, and the News is Good The Obama Administration's military budget proposals for next year are out, and we can breathe a collective sigh of relief.
Military & Aerospace Electronics November 2006 John Keller	Defense industry upbeat; military spending to stay healthy over next decade Predictions released last month say that U.S. defense spending will grow to an annual $609.4 billion over the next decade.
Military & Aerospace Electronics October 2004	The move to lead-free solders has its own challenges and hidden problems Peak reflow temperature increases and the imperfectly known characteristics of new materials lie at the core of the problem. Will the new finish layer on the lead frame adhere well to the epoxy? Will the epoxy stick to the die face?
Military & Aerospace Electronics May 2006	Annie Turner takes helm of Military & Aerospace Electronics Europe magazine A veteran journalist of the technology industry, Turner has written about the technical, economic, social, and political aspects of information technology and telecommunications for the last 11 years.
Military & Aerospace Electronics August 2007 Courtney E. Howard	Industry Wants Unique Part Numbers for Lead-Free BGAs The electronics industry is calling for unique part numbers to differentiate lead-free ball-grid-array (BGA) metallurgies that comply with the European Union's Restriction on Hazardous Substances (RoHS) directive.
Military & Aerospace Electronics April 2006 Courtney E. Howard	Network-Centric Operations and Technology Take Center Stage at MTC 2006 A top U.S. Air Force expert stressed the importance of the U.S. military's move from a weapons-centric to a network-centric model of future warfare in a keynote address he delivered at the 2006 Military Technologies Conference.
Military & Aerospace Electronics December 2008 John Keller	DOD to cut unmanned aerial vehicle procurement by one third over next decade The early years of the 21st century have seen explosive growth in U.S. Department of Defense purchases of unmanned aerial vehicles, but DOD is expected to cut UAV procurement by one-third over the next decade.
Military & Aerospace Electronics July 2005 Gurnett & Adams	Lead-free processing involves several board issues As worldwide electronics manufacturing moves slowly and unevenly into lead-free materials and processes, board assemblers should pay attention to six areas of potential problems.