Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

National Defense September 2005 Lawrence P. Farrell Jr.	Industry Must Sharpen Its Manufacturing Edge As the defense budget continues to tighten, the cost of manufacturing must be cut. Even relatively small investments in advanced manufacturing processes can save millions of dollars in weapon costs.
National Defense August 2004 William Kennedy	Research Center Assisting Domestic Manufacturers In response to growing concerns about the state of U.S. manufacturing industries, Rep. John P. Murtha created the National Center for Defense Manufacturing and Machining.
National Defense February 2005 Lawrence P. Farrell Jr.	U.S. Must Not Lose Manufacturing Edge The decline in U.S. manufacturing capabilities is not news to many of our readers. Only a year ago, we reported that the manufacturing sector had sustained 37 consecutive months of job losses.
National Defense July 2014 Dan Parsons	Army Switches From Vehicle Procurement to Sustainment Mode Military commanders and the companies that built thousands of vehicles in support of two wars are preparing for reduced budgets and requirements after more than a decade of combat.
National Defense January 2007 Lawrence P. Farrell Jr.	Manufacturing Edge Essential to Defense While the U.S. defense industry remains unsurpassed, it faces long-term challenges - one of which is its ability to secure innovative manufacturing capabilities. This applies all the way from bombers to boots.
National Defense October 2010 Peter M. Steffes	Should Defense Overhead Reduction Plans Consider Maintenance Depots? As the Defense Department studies ways to squeeze more efficiency from the military's overhead accounts, experts have suggested the maintenance and repair depots could be an obvious target.
National Defense February 2004 Lawrence P. Farrell Jr.	State of Manufacturing Base Is Cause for Concern One lesson that we learned from the "Buy America" debate last year was the need for a thorough and detailed discussion on a national level about the state of the U.S. industrial base, particularly the capabilities of American industry to manufacture sophisticated components for weapon systems.
National Defense January 2015 Sandra I. Erwin	Military Challenged to Maintain Decades-Old Aircraft The U.S. military operates fleets of Cold War-era aircraft that will not be replaced any time soon. For the Pentagon, this creates daunting challenges, experts warn. Airplanes will have to fly much longer than planned and, at a time of tight budgets, the cost of maintaining aging equipment is projected to soar.
National Defense February 2005 Sandra I. Erwin	Truck Armor Kits Could Be Improved, Says Army Tester The dramatic surge in the number and intensity of attacks against U.S. military vehicles in Iraq has prompted a rethinking of the Army's approach to armoring trucks, officials said.
National Defense April 2008 Alan L. Gropman	Combat Vehicle Sector Could be Headed for Turbulent Times The defense industry has thrived despite erratic government funding and regulatory vagaries. But it must now prepare for a possible downturn during the next several years.
National Defense April 2009 Sandra I. Erwin	Army's Industrial Depots Prepare for Surge The Army's maintenance depots may have to rapidly ramp up their capacity so they can fix up to 40,000 trucks and combat vehicles that could be returning from Iraq in the next several years.
National Defense July 2005 Frank Colucci	Helicopter Suppliers Must Modernize, Says Defense Industrial Policy Chief The Defense Department predicts that military helicopter suppliers will recover from the current slump in aircraft production if they invest in new manufacturing technologies.
National Defense April 2006 Sandra I. Erwin	Army Grappling With Antiquated Buying Rules Army leaders continue to squabble over how best to satisfy soldiers' immediate equipment needs and simultaneously develop futuristic weapons systems for the decades ahead.
National Defense July 2012 Sandra I. Erwin	Defense Industry Targets $150B Weapons Maintenance Market Operations and support, or operations and sustainment, is military-speak for the unglamorous work of maintaining, refurbishing and overhauling Pentagon hardware, some of which is decades old.
National Defense December 2004 Sandra I. Erwin	Survival in Combat Zones Requires 'Layers' of Protection Army laboratories have for decades been pushing the limits of combat survivability technology, but the pressure to produce results rose when the service launched the Future Combat Systems in 1999, a program to develop a family of high-tech vehicles by 2012.
HBS Working Knowledge May 16, 2012	Can Decades of Military Overspending be Fixed? Costs tend to rise in all organizations unless managers and their staffs have the motivation and skill to control them. This phenomenon is analyzed during 50 years of US military overspending.
National Defense August 2006 Sandra I. Erwin	Loaded With Aging Planes, Air Force Gears Up for Surge in Repair Work Despite strict mandates to cut thousands of jobs, the Air Force Materiel Command has ambitious plans to modernize its maintenance depots and become less dependent on contractors to repair and upgrade aircraft.
National Defense April 2005 Sandra I. Erwin	Shields of Steel The increase in attacks targeting U.S. troops in Iraq prompted the Army to equip trucks with protective armor.
National Defense July 2008 Grace V. Jean	F-35 factory: One aircraft per day by 2016 Inside a manufacturing facility so large that workers routinely bike and ride golf carts down paths named after fighter jets, preparations are underway to begin mass production of the F-35 Joint Strike Fighter.
IEEE Spectrum November 2008 Robert N. Charette	What's Wrong with Weapons Acquisitions? Escalating complexity, a shortage of trained workers, and crass politicization mean that most programs to develop new military systems fail to meet expectations.
National Defense February 2011 Eric Beidel	Military Trucks Weighed Down By 'Yesteryear's Technology' Companies say they are delivering the innovation that the Pentagon says it needs from industry. But many times, vendors still find it difficult to secure long-term deals.
National Defense January 2007 Sandra I. Erwin	A Year at War: One Million Pieces of Damaged Equipment Repairs of worn-out and war-damaged Army equipment are certain to remain a $13 billion to $15 billion-a-year business - if not higher - for the foreseeable future.
BusinessWeek April 25, 2005 Palmeri & Crock	Evening The Odds In A Guerrilla War Helped by feedback from Iraq, companies are speeding up weapons design. Defense contractors are also looking to retool weapons.
National Defense April 2012 Eric Beidel	Downturn in Military Truck Market Produces More Losers Than Winners The frustration and anxiety among suppliers in the tactical vehicle market is palpable. The armed services have begun to terminate, delay or cut back on anticipated truck programs.
National Defense March 2007 Sandra I. Erwin	Army Not Always Amenable to the Ways of Corporate America Many of the Army's top leaders are fretting about the way the service manages its resources. They confront an alarming financial situation that is caused by escalating war expenses, wasteful buying practices and costly plans to drastically expand the size of the force.
National Defense January 2008 Sandra I. Erwin	In the Army, Why Can't Soldiers Be Customers? Nowhere do companies find it more difficult to concentrate on true customer needs than in the Army procurement system.
National Defense June 2007 Sandra I. Erwin	More Services, Less Hardware Define Current Military Buildup In the midst of the largest military expansion since the Reagan administration, industry analysts warn that the gravy days cannot last much longer.
National Defense May 2008 Alan L. Gropman	Uncertainty About Budgets, Workforce Shape Future of U.S. Weapons Industry Uncertainty about future conflicts and the capabilities of potential enemies raise complex questions about what weaponry the U.S. military will need to counter a wide spectrum of threats.
IndustryWeek February 1, 2007 Ralph Keller	Continuous Improvement -- Confronting Our Manufacturing Labor Crisis We need to show today's youth that manufacturing has a stable future.
National Defense April 2006 Sandra I. Erwin	The Next Humvee: Army, Marines Weigh Options The Army and Marine Corps may decide as early as May 2007 to begin searching for a new vehicle that would replace the ubiquitous Humvee.
National Defense July 2005 Lawrence P. Farrell	Army Meets Tough Procurement Challenge Head-On Shortages of armored vehicles, particularly, commanded considerable attention because they highlighted the challenges of predicting equipment requirements and ensuring the readiness of the industrial base. The response to the steep increase in demand for armored vehicles in fact has been a remarkable success story.
Military & Aerospace Electronics September 2007 John Keller	Systems Integrators Waking up to the Benefits of Contract Manufacturing Military and aerospace prime systems integrators are catching on to a business reality that the commercial industry has known for years -- outsourcing electronic systems manufacturing can save a lot of headaches.
National Defense June 2010 Lawrence P. Farrell Jr.	Defense Manufacturing: A Crisis in the Making Defense manufacturing is like the weather. Everyone talks about it, but no one does anything.
National Defense November 2006 Sandra I. Erwin	Industry Fortune Tellers See a Mix of Boom and Bust For the defense industry, depending on whom you talk to, these are the best of times, and the worst of times.
IndustryWeek March 1, 2008 David Blanchard	The Biggest Challenges Facing Manufacturers -- IndustryWeek's 2008 Salary Survey Responses Offshore competition. Finding and retaining skilled labor. Rising costs. Government regulations. Sound familiar? Manufacturing managers share many of the same headaches and confront common challenges.
IndustryWeek February 1, 2002 William H. Miller	Reaching New Heights Lockheed Martin and partners employ dazzling advanced manufacturing technologies to fulfill rich Joint Strike Fighter contract...
IndustryWeek May 1, 2003 John S. McClenahen	The Next Crisis: Too Few Workers Even as the U.S. economy struggles to recover from recession and manufacturing firms continue to thin their ranks, there's still talk of a skills shortage. No kidding. Here's what the experts are saying and what you can do about it.
IndustryWeek March 1, 2007 David Blanchard	Manufacturing's Biggest Challenges -- IndustryWeek's 2007 Salary Survey Responses If you come to work everyday worrying about global competition, finding and keeping skilled labor, raw material shortages, and the quality of your product, you're not alone.
IndustryWeek March 1, 2009 David Blanchard	IndustryWeek's 2009 Salary Survey Comments on Manufacturing's Biggest Challenge: The Economy As part of the IndustryWeek 2009 Salary Survey, we asked the open-ended question: What is the biggest challenge facing the manufacturing industry today?
National Defense January 2012 Sandra I. Erwin	Budget Squeeze Could Spur Defense Industry Shakeup To borrow a line from Casey at the Bat, there is no joy in Mudville. Defense industry executives, with good reason, are experiencing considerable anxiety as Pentagon budget cuts lurk around the corner.
IndustryWeek November 1, 2008 John Teresko	Competing with Composites Get ready to research, re-engineer, reinvent and innovate new products with composites.
National Defense December 2003 Sandra I. Erwin	Budget Logjams Slow Equipment Deliveries to Iraq Despite a supplemental appropriation approved by Congress last month for operations in Iraq, the Army is having a tough time meeting escalating demands for spare parts, vehicle components and repairs.
Food Processing October 2010 Gerald Shankel	America's Most Wanted: Skilled Workers A highly skilled and trained workforce is necessary to meet 21st century manufacturing needs.
IndustryWeek September 16, 2009 Ralph Keller	Continuous Improvement -- What's the Future of U.S. Manufacturing? Some claim manufacturing is dying here but the numbers tell a different story.
IndustryWeek June 17, 2009 John Teresko	Reorganizing for Machining Solutions Increasingly, the evolution of manufacturing technologies such as machining is enabling automation vendors to reach for strategies that embrace the total solution.
IndustryWeek June 1, 2007 David Blanchard	The Face Of American Manufacturing The United States is the world's most productive country, but the global landscape has changed dramatically in recent years and even more changes are on the way.
IEEE Spectrum January 2006 Erico Guizzo	Winner: Carbon Takeoff With a radical carbon-fiber composite wing, Boeing is pushing the envelope of aviation design in its new 787 jetliner.
National Defense November 2011 Beidel et al.	10 Technologies the U.S. Military Will Need For the Next War Examples are faster and quieter helicopters, advanced crowd-control weapons, lighter infantry equipment that doesn't overburden troops, ultra-light trucks and better battlefield communications.
National Defense April 2011 Lawrence P. Farrell Jr.	For Defense Industry, the Path Forward Is Still Clouded by Uncertainty For industry, what does this all mean? One industry professional has described the current environment as "Eisenhower's big nightmare." Could a reasonably competitive industry survive large reductions in funding?
IndustryWeek March 1, 2008 David Blanchard	Just In Time -- Buddy, Can You Spare a Job? U.S. manufacturers assert their continuing relevance despite a decline in overall employment and a lack of commitment from politicians.