| Similar Articles |
|---|
 |
Military & Aerospace Electronics
October 2009 |
Mil-Spec Military Connector Introduced by ITT for RF and Signal Contacts The military connectors are for harsh applications such as military, avionics, commercial aircraft, satellite, and petroleum exploration applications.   |
Military & Aerospace Electronics
April 2010 |
Armored Vehicles Make Use of Plastic Circular Connectors From ITT ITT Interconnect Solutions report their company's APD Series plastic circular connectors are being specified for use as military connectors in military wheeled armored vehicles for onboard applications that do not require mil-spec connectors. |
Military & Aerospace Electronics
April 2007 |
Thermotron Unveils 8000-Force-Pound Vibration Test System The DSX-8000 offers vibration test solutions for a wide range of applications, including automotive squeak and rattle testing, military transportation testing, avionics/aerospace vibration test requirements, and stress screening applications. |
Military & Aerospace Electronics
August 2009 |
Military Connectors Receive Customizable Receptacles From ITT Interconnect ITT Interconnect Solutions is offering receptacles for its KP Series circular military connectors. |
Military & Aerospace Electronics
December 2008
John Keller |
Unmanned Vehicles and Network-Centric Warfare Put the Squeeze on Rugged Military Connectors Environmental demands for military electrical and electro-optic connectors are becoming ever more pressing as defense systems enter the network-centric age, and as defense planners rely more heavily on unmanned vehicles. |
Military & Aerospace Electronics
January 2010 |
Microelectronics Thermal Management Device From Nextreme Meets MIL-STD 883 Shock Standard An advanced heat-pumping thermoelectric device for electronics thermal management from Nextreme Thermal Solutions has passed the 3000-G shock test as defined in the 2002 mechanical shock standard. |
Military & Aerospace Electronics
October 2007
John Keller |
Military connector buyers stress small size, light weight, and commercial interfaces Military and aerospace systems integrators today want the best of both worlds -- the benefits of commercial off-the-shelf and the durability and reliability of mil-spec components. |
Military & Aerospace Electronics
October 2006
John Keller |
Suppliers of military connectors feel the pressure for increased performance, smaller size, and lighter weight The demand is not only for connecting subsystems, but also for connecting boards and modules inside boxes. |
Military & Aerospace Electronics
April 2010 |
Rugged Connector for Avionics Released by ITT ITT Interconnect Solutions developed a 19-way commercial Pogo pin connector and cable assembly that meet electrical and mechanical specifications for aircraft electronics, medical test and diagnostic imaging equipment, and instrumentation and industrial equipment. |
Military & Aerospace Electronics
February 2009 |
ITT Introduces 19-Way DIN Connector for Harsh Environments ITT Interconnect Solutions' new automotive product DIN (APD) circular connector withstands harsh and wet-area environments in applications such as commercial vehicles and industrial automation. |
Military & Aerospace Electronics
April 2009 |
ITT Interconnect Solutions Offers Sealed Circular Connectors for High-Pressure Operating Conditions ITT Interconnect Solutions is introducing its miniature circular connectors called the MIKQ IP68 series. |
Military & Aerospace Electronics
November 2006 |
COTS military and avionics DC-DC converters The MTC noncustom converter is available in 5-, 15-, and 35-watt ratings. |
Military & Aerospace Electronics
February 2010
John McHale |
Fiber-Optic Avionics Connectors Show Performance Advantages for Avionics Systems A steady aerospace and defense market combined with the performance advantages of fiber over copper has designers of optical avionics connectors confident in the short- and long-term future. |
Military & Aerospace Electronics
April 2008
Courtney E. Howard |
Thermal Management a Challenge for Designers of Future Military Aircraft Today's aviation, vetronics, and other military-aero applications require more power, but have less space. This contributes to higher thermal loads and less opportunity to drive the heat out. |
Military & Aerospace Electronics
February 2006 |
Zinc-plated MIL-DTL-24308/2 and /4 connectors The D-subminiature connectors and are used extensively I/O connections of power, signal, and coaxial wire and cable. |
Military & Aerospace Electronics
September 2005
Ram Rajan |
Solving thermal-management challenges in military and aerospace applications Higher system performance -- often coupled with faster and hotter processors, and denser packaging -- can be two major nemeses for the chassis designer. |
Military & Aerospace Electronics
June 2009 |
Fischer introduces Aluminum connectors for ultralight systems design The connectors are 50 percent lighter than typical metal aerospace connectors for military system applications, mobile equipment, portable systems, and hand-held devices. |
Military & Aerospace Electronics
December 2009
John Keller |
Connector Designers Face Demands for Increased Capability, Smaller Size, and More EMI and Lightning Protection Systems integrators want more capability, higher bandwidth, increased ruggedness, yet they also want connectors that are smaller and lighter than ever before. Are electronic suppliers up to the task? |
Military & Aerospace Electronics
July 2009 |
Parker Offers Liquid Cooling for High-Power Electronic Thermal Management Parker Hannifin is introducing a two-phase liquid cooling system for electronic thermal management and heat removal from high-power electronics. |
Military & Aerospace Electronics
April 2008 |
C&K Offers Rectangular Connectors for Military and Aerospace Applications C&K Components is introducing high-reliability rectangular connectors for military, aerospace, and medical applications. |
Military & Aerospace Electronics
April 2010 |
Irvine Sensors, Optics 1 to Deliver Thermal Imaging Systems to Naval Surface Warfare Center The thermal imagers are for clip-on thermal imager (COTI) systems that Optics 1 is building for the U.S. Naval Surface Warfare Center. |
Military & Aerospace Electronics
January 2006 |
Optical Interconnect Withstands Harsh Environments The PRO BEAM connector series from Tyco Electronics is a fiber-optic interconnect designed specifically for fast data connections where resistance to severe environmental conditions is paramount. |
Military & Aerospace Electronics
December 2008 |
ITT Interconnect Introduces Rugged Electrical Connectors for Transportation Applications ITT Interconnect Solutions is introducing electronic connectors for transportation applications called the Trident series. |
Military & Aerospace Electronics
April 2008
Courtney E. Howard |
Thermal Management Targets the Enemy of Electronics: Excessive Heat Heat threatens the longevity and performance of electronics, especially vehicular electronics (vetronics), in military-aero environments. |
Military & Aerospace Electronics
May 2008
Courtney E. Howard |
Hot components and cool enclosures Systems architects and integrators are tackling the issues of military electronics survivability with clever chassis designs. |
Military & Aerospace Electronics
May 2009
J.R. Wilson |
Electronic thermal management is heading to the wall Systems designers who are used to boosting electronic system performance by adding ever-more transistors may have to rethink their design approaches. |
Military & Aerospace Electronics
May 2008 |
Products Martek Power offers high-power, multichannel power modules... Aeroflex offers Battery Electronic Unit family of Li-Ion cell balancing products... Elmo offers board-mounted servo drive with 5 kilowatts continuous power... etc. |
Military & Aerospace Electronics
February 2006
Ben Ames |
ITT picks Kopin display for Army night-vision goggles The Enhanced Night Vision Goggle helps improve mobility and situational awareness by providing the soldier with combined images from an image intensifier and a thermal imager. |
