| Similar Articles |
|---|
 |
U.S. CPSC
February 23, 2005 |
Cressi-Sub Recall of SCUBA Buoyancy Compensators A slow leak from the shoulder exhaust caused by expansion of an internal cable housing could result in slow deflation. This could impact the diver's ability to control buoyancy.   |
U.S. CPSC
October 2, 2006 |
Scubapro Recalls MK 20 Scuba Regulators for Service Over-tightening of the Yoke or Din retainer during annual servicing of these regulators could result in a stress crack and failure of the regulator. If this occurs during a dive, air supply could be interrupted, posing a drowning hazard. |
U.S. CPSC
June 7, 2006 |
Scubapro X650 Diving Regulators Recalled for Drowning Hazard Because of a manufacturing error, the regulators could malfunction, posing a drowning hazard to users. |
U.S. CPSC
October 1, 2009 |
Diving Equipment Recalled by Halcyon Manufacturing Due to Drowning Hazard The over pressure valves (OPVs) in the diving equipment could fail allowing the buoyancy compensator devices (BCDs) and the diver lift inflatable devices to leak, posing a drowning hazard to divers. |
U.S. CPSC
December 22, 2009 |
Diving Equipment Recalled by Dive Rite Due to Drowning Hazard The over pressure valve springs in the diving equipment could rust and fail allowing the buoyancy compensator devices to leak, posing a drowning hazard to divers. |
U.S. CPSC
September 2, 2004 |
Halcyon Manufacturing Recall of SCUBA BC Inflators The SCUBA BC bladder can have a slow leak because of imperfections within the machining of the stainless air barrel of their inflators. This can cause unexpected buoyancy problems with divers, possibly resulting in decompression sickness. |
U.S. CPSC
May 31, 2007 |
Innovative Scuba Concepts Recalls Diving Regulator Components Due to Drowning Hazard The swivel, which is attached to a diving regulator, could separate while diving. This poses a risk of decompression sickness due to rapid ascent, and air embolism or drowning if the diver panics or the emergency ascent procedure fails. |
U.S. CPSC
January 30, 2002 |
Custom Buoyancy Inc. Recalls Scuba Diving Devices The overpressure valve can stick in the open position, posing a drowning hazard to divers... |
U.S. CPSC
December 19, 2001 |
Diving Unlimited International Recalls Scuba Diving Devices The overpressure valve can stick in the open position, posing a drowning hazard to divers... |
U.S. CPSC
April 28, 2010 |
Scuba Diving Buoyancy Compensators Recalled by Ocean Management Systems Due to Drowning Hazard The buoyancy compensator seal ring could crack, posing a drowning hazard to divers. |
U.S. CPSC
June 30, 2010 |
Felt Bicycles Recalls Bicycles Due to Fall Hazard The oral inflator button is not properly bonded to the oral stem and can fall off during use, posing a leak of the buoyancy compensator contents. This poses a drowning hazard. |
U.S. CPSC
May 3, 2011 |
Sea Elite Systems Recalls Buoyancy Control Devices Due to Drowning Hazard The spring in the over pressure valve can corrode and break preventing the buoyancy control device from retaining air, posing a drowning hazard to consumers. |
