Similar Articles

Browse Main Topics:

Business
Computers & Electronics
Education & Reference
Entertainment & Leisure
Family & Home
Finance & Investment
Health
Internet
Pets & Animals
Science & Technology
Society, Politics & Culture
Sports & Recreation

Similar Articles

U.S. CPSC May 18, 2005	Robert Bosch Tool Corp. Recall of Circular Saws The lower blade guard can malfunction, creating a risk of injury as severe as amputation.
U.S. CPSC August 15, 2007	Robert Bosch Tool Corp. Recalls Skil(r) Circular Saws Due to Laceration Hazard The trigger switch on the saw can be locked "on," or the switch can be turned on, without the use of the safety lock-out. This can cause unexpected operation of the saw, posing a risk of laceration.
U.S. CPSC June 12, 2008	Robert Bosch Tool Corp. Recalls Hammer Drills Due to Risk of Injury The drill can continue to operate after the trigger has been released, posing a risk of injury to consumers.
U.S. CPSC December 14, 2010	Portable Table-Saws Recalled by Ryobi Due to Laceration Hazard The saw blade on the motor carriage could be misaligned, posing a laceration hazard.
U.S. CPSC February 18, 2004	Ariens Co. of Snow Throwers The blade may not stop when the blade brake control is applied, resulting in continued blade movement. The potential for injury exists if consumers make contact with the rotary blade.
U.S. CPSC April 13, 2006	Toe-Kick Saws Recalled Due to Broken Handles The saw's plastic handle can break, causing the user to lose control of the saw which could kick back and present a laceration hazard if the blade is in motion.
U.S. CPSC February 11, 2005	BISSELL Recall to Repair Upright Carpet Cleaners The carpet cleaner's metal upper handle can pose an electric shock hazard to consumers.
U.S. CPSC November 8, 2006	WMH Tool Group Inc. Recalls Wilton Mitre Saws for Laceration Hazard The blade assembly could unexpectedly break free from the stationary base, posing a laceration hazard to consumers.
U.S. CPSC August 19, 2009	Ridgid Table Saws Sold Exclusively at Home Depot Recalled by One World Technologies Due to Laceration Hazard The table saw's arbor shaft can fail when used with a stacked blade set (commonly known as a "stacked dado set"), which is used to cut grooves. The stacked blade set can be ejected from the saw, posing a potential laceration hazard to consumers.
U.S. CPSC April 5, 2007	Sears Warns Consumers to Remove Label from Craftsman Circular Saws, Obstructed Blade Guard Poses Laceration Hazard The "Craftsman" logo label located on the upper blade guard can become partially detached and interfere with the proper operation of the lower blade guard, exposing the saw's blade and posing a laceration hazard to consumers.
U.S. CPSC March 11, 2005	Applica Consumer Products Inc. Recall of Black & Decker(R) Brand ProBlend(R) Blenders The blades can weaken or break during use while making frozen beverages. A broken blade presents a risk of injury if taken into the mouth or swallowed.
U.S. CPSC December 2, 2003	Bachtold Brothers Inc. Recall of Brush Cutters The operator can come in contact with the rotating blade, even when disengaged, by pulling on the front of the mower deck while the engine is running, posing a serious injury hazard to consumers.
U.S. CPSC November 8, 2006	DeWalt Recalls Framing Saws and Circular Saws for Laceration Hazard The lower blade guard can fail to close, leaving the blade exposed and presenting a laceration hazard to consumers.
U.S. CPSC January 13, 2009	Ryobi Corded Circular Saws Sold Exclusively at Home Depot Recalled By One World Technologies Inc. Due to Laceration Hazard The return spring on the circular saw's lower blade guard can break, posing a laceration hazard to consumers.
U.S. CPSC December 19, 2006	Lifetime Brands Inc. Recalls Farberware(R) Fruit Slicers and Corers Due to Laceration Hazard The metal blade can separate from the plastic handle during use, resulting in cuts to consumer's hands and fingers.
U.S. CPSC September 8, 2009	Bandsaws Recalled by Grizzly Industrial Due to Shock Hazard Some of the recalled bandsaws do not have a grounding wire installed, which poses an electric shock hazard to consumers.
U.S. CPSC April 29, 2008	DEWALT Recalls Table Saws Due to Laceration Hazard The pivot bracket on the saw can separate which can misalign the blade and the fence and cause kick back. This poses a laceration hazard to consumers.
U.S. CPSC April 7, 2005	Sears Roebuck and Co. Recall of Table Saw Rip Fences The rip fence -- a metal guide that keeps material being sawed from shifting side to side as it passes through the cutting blade -- can come loose. This could result in kickback of the material being sawed and possible injury to the operator.
U.S. CPSC September 7, 2006	LeapFrog Recalls to Repair Children's Activity Centers Due to Arm Entrapment Hazard A child's arm can become caught in the activity center's plastic tube, posing a risk of injury to children.
U.S. CPSC June 25, 2009	Big Muddy Motor Sports Recalls Generators Due to Fire Hazard The 220-volt receptacle can fail to produce power correctly and cause power surges that can damage appliances. This poses a risk of fire and possible injury to consumers.
U.S. CPSC January 15, 2009	Bosch and Siemens Model Dishwashers Recalled by BSH Home Appliances Corporation Due to Fire Hazard An electrical component in certain model dishwashers can overheat, posing a fire hazard to consumers.
U.S. CPSC June 30, 2010	Southern Technologies Recalls Drill Presses Due to Shock Hazard Wires in the motor housing can be pinched, posing a risk of electrical shock to the consumer.
U.S. CPSC September 29, 2010	Black & Decker Recalls Cordless Electric Lawnmowers Due to Laceration Hazard The lawnmower's motor and blade can unexpectedly turn on after the mower's safety key is removed, posing a laceration hazard to consumers. Removing the safety key is designed to keep this from occurring.
U.S. CPSC November 23, 2010	Robert Bosch Tool Corp. Recalls Bosch Hammer Drills Due to Electrical Shock Hazard The models have a grounding system and trigger switch that could cause ground wire abrasion and/or ground connector failure posing a shock hazard.
U.S. CPSC April 2, 2004	Valley Dynamo Recall of Air Hockey Tables The blower motor, located under the table, has an opening large enough for a child's finger, posing a laceration hazard.
U.S. CPSC November 17, 2004	Country Home Products, Inc. Recall to Repair Cordless Electric Lawnmowers These lawnmowers contain an electronic switch in their handlebar. In certain instances this switch is not aligned properly. In units containing the defective switch, when the handlebar is released the motor continues to run causing the potential for personal injury or property damage.
U.S. CPSC January 10, 2008	A.O. Smith Recalls Exhaust Fan Electric Motors Due to Fire Hazard The fan's electric motor can be miswired and overheat, posing a fire hazard.
U.S. CPSC July 13, 2006	Ryobi Radial Arm Saws Recalled for Blade Detachment Hazard Cracking of the plastic motor housing can cause the blade assembly to fall during operation, posing a risk of laceration to the operator or bystanders. The detachment may occur unexpectedly and without warning.
U.S. CPSC December 21, 2006	DEWALT Recalls Cordless Reciprocating Saws for Fire Hazard The switch on these saws can short circuit, posing a fire hazard.
U.S. CPSC August 1, 2006	Troy-Bilt String Trimmer Sold at Lowe's Recalled for Laceration Hazard The blade that trims the excess string of these weed trimmers can detach from the plastic shield covering the trimmer head. The blade can then be thrown outward, hitting the user or bystander, resulting in a laceration.
U.S. CPSC July 20, 2004	BSH Home Appliances Corp. Recall to Repair Range Hoods These range hoods could have the blower motor installed with a screw that might penetrate the motor housing, posing an electric shock hazard to consumers.
U.S. CPSC February 18, 2010	Motor Controllers for Submersible Pump Systems Recalled by Franklin Electric Due to Shock Hazard The product label can lose adhesion, exposing the circuitry. This could pose a shock hazard to consumers.
U.S. CPSC October 15, 2003	Lawnmowers Recalled by Honda Power Equipment Manufacturing Inc. If the lawnmower strikes an object with sufficient force, the crankshaft can bend. Vibration created by a bent crankshaft can eventually result in a fatigue failure of the Roto-stop(TM) blade brake control assembly.
U.S. CPSC January 23, 2006	Country Home Products, Inc. Recall to Repair Cordless Electric Lawnmowers When the handlebar is released on the recalled lawnmowers, the motor could continue to run -- which causes the blade to continue to spin, allowing excessive heat build-up in the internal wire brake coil and safety key.
U.S. CPSC January 24, 2006	Porter-Cable Recall to Repair Routers The Porter-Cable 890 Series Router is being recalled because the motor coil insulation can be worn away by vibration from the motor, which could pose a shock hazard.
U.S. CPSC October 13, 2004	CPSC, Little Giant Pump Co. Announce Recall of Cooler Pumps The motor caps on the cooler pumps are not made with flame- retardant material and an internal electrical failure can ignite the cap, posing a fire hazard to consumers.
U.S. CPSC October 22, 2003	Lawn Mowers Recalled by Husqvarna Forest and Garden Co. A loose blade bolt could cause the blade to come loose or the blade adapter to crack, resulting in the blade falling off. Should this condition occur, the operator or a bystander could be injured.
U.S. CPSC October 30, 2008	Fit & Fresh Mixers Recalled by MEDport LLC Due to Laceration Hazard While placing the cup on or off the base of the mixer, the mixer can unexpectedly turn on, activating the blade. This can pose a serious laceration hazard to consumers.
U.S. CPSC October 18, 2007	The Gymboree Corp. Recalls Toy Swords Due to Breakage and Laceration Hazard The swords can break, creating a sharp point, which poses a laceration hazard to consumers.
U.S. CPSC July 25, 2006	Children's Lamp Sold at The Home Depot(R) Recalled for Laceration Hazard The glass window of the fire truck and bulldozer night light can become dislodged, fall and shatter into small pieces. This poses a laceration hazard and a serious risk of injury if ingested by a small child.
U.S. CPSC August 7, 2008	Atico International USA Recalls Personal Blenders Due to Laceration Hazard While placing the cup on or off the base of the blender, the blender can be inadvertently turned on, activating the blade. This can pose a serious laceration hazard to consumers.
U.S. CPSC November 19, 2010	Motorized Awnings Recalled by Somfy Systems Due to Shock Hazard The awning motor's power cable can be severed while the awning is opened or closed manually, posing a risk of electrical shock to the user.
U.S. CPSC December 19, 2007	American Honda Motor Corp. Recalls Lawn Mowers Due to Laceration Hazard The cutting blades could rotate under power when the control lever is released. The lawn mowers do not comply with mandatory federal safety standards for lawn mowers. The spinning blade poses a serious laceration hazard to consumers.
U.S. CPSC June 16, 2009	Viking Range Corporation Recalls Built-In Refrigerators Due to Injury Hazard; Doors Can Detach The refrigerator's doors can detach, posing an injury hazard to consumers.
U.S. CPSC December 2, 2009	Blenders Recalled by Haier America Due to Laceration Hazard The blade assemblies of the blenders may come apart or break, posing a laceration risk.
U.S. CPSC May 5, 2009	Wagner Spray Tech Recalls Paint Sprayers Due to Electrical Shock Hazard The on-off switch can be dislodged from the casing, resulting in exposure of electrical connections. This can pose an electrical shock hazard to the consumer.
U.S. CPSC August 20, 2002	Black & Decker Recalls Table Saws The motor housing on the saw may crack, posing a risk of electric shock to consumers.
U.S. CPSC May 31, 2011	Model Helicopters Recalled by Horizon Hobby Due to Impact and Laceration Hazards The main blade grips and main rotor blades can release from the main rotor head, posing an impact and laceration hazard.
U.S. CPSC December 15, 2006	Square D Recalls Safety Switches Due to Shock or Electrocution Hazard The safety switch can continue to supply electricity even after being placed in the "OFF" position. This poses the risk of an electric shock or electrocution hazard to consumers.
U.S. CPSC October 18, 2005	Target Recall of Jumbo Pencils with Sharpeners The sharpener's razor blade is exposed when the cover is removed. Also, the pencil sharpener hole is large enough to allow a finger to fit inside. This poses a laceration hazard to children and adults.