Similar Articles |
|
U.S. CPSC April 13, 2005 |
Yamaha Motor Corporation, U.S.A. Recall Reminder for ATVs In February 2004, Yamaha announced a voluntary recall of Raptor YFM660R ATVs. Vibration from the engine and driveline during long periods of high rpm usage could cause the rear master cylinder reservoir to agitate resulting in brake fluid aeration and adversely affecting rear brake performance. |
U.S. CPSC April 13, 2005 |
Yamaha Motor Corp., U.S.A. Recall Reminder for Off-Road Motorcycles and ATVs In September 2004, Yamaha announced a voluntary recall of PW80 and TTR90 Off-Road Motorcycles and Grizzly 125 ATVs. The rear brake shoe material could separate due to improper adhesive curing, adversely affecting rear braking performance. |
U.S. CPSC March 25, 2008 |
Yamaha Motor Corporation U.S.A. Recalls Rhino Side-by-Side Vehicles Due to Risk of Brake Failure A brake caliper could have been made incorrectly, resulting in brake fluid leaking. This can cause a loss of braking and control of the vehicle, posing a serious safety risk to the driver and passenger. |
U.S. CPSC July 24, 2006 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles The mounting brackets used to secure the left-front suspension arm to the ATV frame may not have been welded completely and could break off during riding. If this occurs the rider could lose control of the ATV and crash, posing a risk of serious injury or death. |
U.S. CPSC August 20, 2002 |
Arctic Cat Inc. Recalls All-Terrain Vehicles The ball joints on the front suspension of these ATVs can fail, resulting in a loss of control. This can cause the ATV to overturn, posing a risk of serious injury or death to riders. |
U.S. CPSC April 29, 2010 |
Yamaha Recalls ATVs Due to Crash Hazard The steering column support assembly can crack and cause the rider to lose steering control, posing a risk of injury or death to riders. |
U.S. CPSC July 3, 2006 |
Bombardier Recreational Products Inc. Recalls All-Terrain Vehicles for Fire Hazard The operator could ride with their foot engaging the rear brake without noticing. This can cause the rear brake to overheat and possibly ignite, posing a risk of serious injury or death. |
U.S. CPSC November 20, 2001 |
Polaris Industries Inc. Recall ATVs Screws in the ATV's manual transmission can loosen, causing the rear wheels to lock. This can cause the driver to lose control of the ATV and crash, possibly resulting in injury or death. |
U.S. CPSC October 22, 2007 |
ATVs Recalled By KTM North America Due to Brake Failure The rear brake caliper support can crack; this could result in the potential for a loss of the use of the rear brake and subsequently lead to an accident. |
U.S. CPSC September 14, 2004 |
Polaris Industries Recall of ATVs The front brake lines can crack and leak brake fluid, possibly resulting in loss of braking capability. This could result in severe injury or death. |
U.S. CPSC January 2, 2008 |
ATVs Recalled By KYMCO Due to Suspension Failure; Riders Can Lose Control of Vehicle The pivot bolts holding the rear suspension onto the frame can become loose, causing the rear swing arm to detach from the chassis posing a risk of injury or death to the operator. |
U.S. CPSC March 29, 2005 |
Bombardier Recreational Products Inc. and BRP US Inc. Recall of DS650 ATVs The rear axle bearings may have not been sufficiently greased. This may cause a breaking of the bearing which could make the ATV unstable. The operator could lose control of the vehicle which could cause injury to the operator. |
U.S. CPSC June 21, 2006 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles for Crash Hazard If the cushion lever mounting bracket on the ATV frame breaks, the rider could lose control of the ATV and crash, posing a risk of serious injury or death. |
U.S. CPSC April 29, 2005 |
American Suzuki Motor Corp. Recall of All-Terrain Vehicles The fuel petcock inserts were made with incorrect material that does not correctly bond the fuel tank and petcock insert, which could allow fuel leakage. If this occurs, a fire hazard with the possibility of injury and property damage could result. |
U.S. CPSC May 8, 2008 |
American Honda Motor Co. Recalls ATVs Due to Loss of Steering Control The electric power steering shaft of the recalled ATVs could break unexpectedly, resulting in the rider's losing steering control. This poses a risk of injury or death to riders. |
U.S. CPSC February 10, 2009 |
ATVs Recalled By KTM North America Due to Brake Failure The rear brake caliper support can crack and the front brake operation can experience a loss of pressure, posing a risk of the rider losing braking and steering control and suffering injuries or death. |
U.S. CPSC March 31, 2009 |
Yamaha Motor Corp. Offers Free Repair For 450, 660, and 700 Model Rhino Vehicles: CPSC advises consumers not to use the off-road vehicles until repaired The U.S. Consumer Product Safety Commission, in cooperation with Yamaha Motor Corp. U.S.A., is announcing a free repair program to address safety issues with all Rhino 450, 660, and 700 model off-highway recreational vehicles. |
U.S. CPSC December 8, 2005 |
Kawasaki Motors Corp. U.S.A. Recall of All-Terrain Vehicles Tie rod separation caused by either wear or severe impact can occur during operation, causing the front wheel to separate from the steering control. Separation of the tie rod can cause the rider to lose control of the ATV, resulting in a serious injury or death to the rider. |
U.S. CPSC October 16, 2007 |
Yamaha Recalls Snowmobiles Due to Risk of Injury and Death from Steering Problem Snow and ice stuck around the steering idler arm can cause a loss of steering ability, posing a risk of injury and death to drivers and passengers. |
U.S. CPSC February 28, 2005 |
Kawasaki Motors Manufacturing Corp. USA Recall of ATVs On some units, the nut which secures the front upper suspension arm pivot bolt could come loose during vehicle use. Continued use of the vehicle could allow the nut to come off, and the upper suspension A-arm pivot bolt to back partially out. This would result in a loss of steering control, and possibly cause the rider to crash and suffer injury or death. |
U.S. CPSC March 20, 2007 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles The bushing pivot mount boss on the left and right suspension arm may not have been welded completely and could break off during riding. If this occurs, the rider could lose control of the ATV and crash, posing risk of serious injury or death. |
U.S. CPSC January 23, 2007 |
Arctic Cat Recalls Model Year 2007 90cc Youth Model ATVs On the recalled ATVs, the handlebar base mounting bolts, tie-rod ends and tie-rod adjustment locking nuts may not have been tightened to the proper torque during the production process. This condition could result in loss of vehicle control which could result in injury or death. |
U.S. CPSC November 2, 2005 |
Yamaha Motor Corp., U.S.A. Recall of ATVs The protective boots covering the steering system's tie-rod ends (universal joints) on the recalled ATVs could be pinched during installation or adjustment, cutting a hole in the rubber. If this occurs, grease could escape, and contaminants such as sand or mud could get into the assembly through the hole, causing accelerated wear. This could result in abnormal steering free play. If the ATV continues to be operated without repair, the ball and socket portion of the tie-rod end could wear to the point that they separate, resulting in loss of steering control, which could cause a vehicle crash with injury or death. |
U.S. CPSC January 10, 2007 |
Kawasaki Motors Corp., U.S.A. Recalls 2007 KFX50 and KFX90 All-Terrain Vehicles On some of these units, the handlebar holder, tie-rod adjustment, and tie-rod end nuts may not have been tightened to the proper torque. Operation of the vehicle can cause the nuts to loosen, resulting in a loss of steering control. |
U.S. CPSC December 27, 2001 |
Arctic Cat Recall of All-Terrain Vehicles The pressure switch in the braking system leaks fluid. The unexpected loss of fluid can cause the brakes to fail, posing the risk of serious injury or death. |
U.S. CPSC July 28, 2005 |
American Suzuki Motor Corp. Recall of ATVs A significant impact to the front wheel of the ATV while the steering is fully turned to either side can result in suspension damage, wear, and an eventual loss of steering control that could result in injury or death. |
U.S. CPSC March 9, 2006 |
American Suzuki Motor Corp. Recalls All-Terrain Vehicles for Fire Hazard Certain 2005 Eiger model year ATVs were assembled with an improperly manufactured plastic fuel tank. The thin portion of these tanks could develop a fuel leak, posing a fire hazard. |
U.S. CPSC October 7, 2003 |
Kawasaki Recall of ATVs The lower front suspension arm can separate from the steering assembly, resulting in a loss of steering control and posing a serious risk of injury to the rider. |
U.S. CPSC January 27, 2010 |
Yamaha Recalls Snowmobiles Due to Loss of Steering Control A bolt in the right front A arm can loosen in the suspension/steering system, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders. |
U.S. CPSC March 4, 2008 |
Polaris Industries Inc. Recalls ATVs Due to Risk of Injury to Riders A retention bolt can come loose causing the rear wheels to lock up, which poses a risk of serious injury to the rider. |
U.S. CPSC March 24, 2005 |
Arctic Cat Inc. Recall of All-Terrain Vehicles (ATVs) The fuel tank used on some all-terrain vehicles could develop a fuel leak. If this occurs, a fire hazard with the possibility of injury and property damage could occur. |
U.S. CPSC January 31, 2007 |
American Honda Motor Corp. Recalls All-Terrain Vehicles for Crash Hazard The front suspension arm ball joints could have been contaminated during production, resulting in rapid wear of one or more of the ball joints and possible ball joint separation. If the ball joint separation occurs while riding, the operator could lose control of the ATV. |
U.S. CPSC December 7, 2004 |
American Suzuki Motor Corporation Recall of 2004 & 2005 Eiger(TM) and Vinson(R) ATVs Recalled ATVs were assembled with an incorrectly sized mounting bolt under the fuel tank. This could result in fuel leakage presenting a fire safety hazard and risk of injury or death. |
U.S. CPSC September 9, 2004 |
Suzuki Recall of Four-Wheel Drive Eiger ATVs There are mislocated welds securing the upper front suspension arm mounting brackets to the frame. The mounting bracket could break off during riding, reducing rider control and resulting in loss of control of the ATV. Loss of control could result in a crash and severe personal injury or death. |
U.S. CPSC July 17, 2008 |
All-Terrain Vehicles Recalled By American Honda Motor Co. Due to Risk of Loss of Control Hazard If the ATV's rubber CV (constant velocity) boots get punctured or torn the joint will become contaminated and severe binding of the CV joints could occur, resulting in the sudden loss of steering control. This poses a risk of injury or death to riders. |
U.S. CPSC May 3, 2007 |
Stateside Powersports Recalls to Repair 90cc Youth Model ATVs The ATVs lack adequate tire labeling, tire pressure gauge, adequate stop engine switch and other safety requirements which could result in injury to consumers. |
U.S. CPSC December 14, 2005 |
American Honda Motor Corp. Recall of All-Terrain Vehicles A safety defect could exist in the transmission that could allow the rider to downshift from 1st gear into reverse without operating the reverse assist (lockout) lever. Unintended engagement of reverse gear while moving forward could lock the rear wheels and cause the rider to lose control. |
U.S. CPSC June 5, 2007 |
CPSC Warns Meerkat 50 Youth ATVs Defective and Dangerous The risk with these ATVs is severe because they are intended for children age 6 to 11, who, in many cases, are just learning how to operate an ATV. |
U.S. CPSC May 30, 2007 |
Polaris Recalls Select Hawkeye Model ATVs for Steering Post Failure Hazard The steering posts can break in the area where the handlebar attaches to the steering post. This can result in loss of steering control resulting in a crash and/or serious injury to the operator. |
U.S. CPSC December 22, 2009 |
Polaris Industries Recalls Certain ATVs Due to Crash Hazard The front suspension ball joint stem can separate from the steering knuckle and cause the rider to lose steering control, posing a risk of injury or death to riders. |
U.S. CPSC July 8, 2010 |
All Terrain Vehicles Recalled by American Suzuki Motor Corp. Due to Loss of Control Hazard The flame arrester screen can become detached from its mounting ring, preventing the throttle valve from returning to the idle position when the throttle lever is released and causing the rider to lose control of the ATV. |
U.S. CPSC September 27, 2004 |
Polaris Industries Recall of ATVs Dispensers The throttle cable may bind when the handlebars are turned full left or full right, resulting in an increase in engine speed and unintended vehicle acceleration. In addition, the fuel line may rub against the vehicle chassis, resulting in a fuel line leak which could be a fire hazard. |
U.S. CPSC June 26, 2008 |
ATVs Recalled By KYMCO Due to Loss of Speed Control A manufacturing defect in the carburetor can cause the throttle to stick open, posing a risk of serious injury or death to the rider. |
U.S. CPSC May 3, 2005 |
Polaris Industries Recall of Select Model Year 2004.5 and 2005 Sportsman and 2005 Model Year Scrambler ATVs Some 2004.5 and 2005 Model Year Sportsman and 2005 Model Year Scrambler 500 ATVs were assembled with possibly defective Electronic Control Modules (ECM) which may fail and overheat. If this were to occur, excessive heat could cause a fire, possibly resulting in serious injury or death. |
U.S. CPSC October 11, 2005 |
Bombardier Recreational Products Inc. Recall of All-Terrain Vehicles The drive pulley inner flange could break resulting in the broken flange fragments becoming a projectile. This situation could cause serious injuries or death to the rider or bystanders. |
U.S. CPSC July 1, 2005 |
HiPer Technology Inc. Recall of ATV Wheels The aluminum center section of the 9-inch wheel can come apart causing the tire and rim to unexpectedly separate from the ATV, posing a risk of serious injury if the rider loses control of the vehicle. |
U.S. CPSC March 15, 2011 |
American Suzuki Motor Corp. Recalls QuadSport ATVs Due to Crash Hazard The regulator/rectifier circuit board can fail and cause the engine to stall during riding due to an insufficient battery charge, increasing the risk of a crash. |
U.S. CPSC August 2, 2005 |
Kawasaki Motors Corp. U.S.A. Recall of ATVs A significant impact to the front wheel of the ATV while the steering is fully turned to either side can result in suspension damage, wear, and an eventual loss of steering control that could result in injury or death. |
U.S. CPSC October 19, 2006 |
Kawasaki Motors Corp., USA Recalls ATV for Loss of Steering Control Hazard The nuts securing the tie-rod ends to the steering shaft may loosen during operation, causing the operator to lose steering control and crash. |
U.S. CPSC March 16, 2005 |
American Suzuki Motor Corporation Recall of 2004-2005 Vinson and 2005 KingQuad All-Terrain Vehicles (ATVs) Water can enter the throttle lever case and freeze, causing the throttle lever to become stuck and fail to automatically return to the idle position when the rider releases the throttle. If the throttle lever does not automatically return to the idle position when the rider releases the throttle, the ATV will not slow down as the rider expects. The rider could lose control of the ATV and an accident resulting in injury or death could occur. |